- Overall Length: 27.96 ft / 8521 mm
- Width Over Tires: 8.25 ft / 2512 mm
- Wheelbase: 20.41 ft / 6219 mm
- Rear Ground Clearance: 1.25 ft / 378 mm
Published dimensions and weight
New Holland RG140.B
Rated at 140 hp, the New Holland RG140.B is a motor grader.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total29775.7 lb13506 kg
03Selected published values60
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for New Holland RG140.B include published moldboard width of 12.1 ft / 3658 mm, published maximum power of 140 hp / 104.4 kw, published operating weight of 29775.7 lb / 13506 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (27.96 ft / 8521 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.25 ft / 2512 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.41 ft / 6219 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length27.96 ft8521 mm
Width Over Tires8.25 ft2512 mm
Wheelbase20.41 ft6219 mm
Rear Ground Clearance1.25 ft378 mm
Tandem Axle Wheelbase5.23 ft1594 mm
Blade Base8.41 ft2562 mm
Height To Top Of Isomount Cab10.31 ft3140 mm
Engine
Number Of Cylinders66
Engine Make23012301
Engine ModelCummins 6A 5.9Cummins 6A 5.9
Power Measured @2200 rpm2200 rpm
Net Power Gear 5-6140 hp104.4 kw
Max Power140 hp104.4 kw
Net Power Gears 7-8140 hp104.4 kw
Net Torque Gears 7-8485 lb ft657.6 Nm
Displacement360.1 cu in5.9 L
AspirationTurbochargedTurbocharged
Operational
Std Operation Weight - Front Axle8157.2 lb3700 kg
Std Operation Weight - Rear Axle21400.3 lb9707 kg
Hydraulic System Fluid Capacity47.6 gal180 L
Std Operation Weight - Total29775.7 lb13506 kg
Max Operation Weight - Front Axle8157.2 lb3700 kg
Max Operation Weight - Rear Axle21620.8 lb9807 kg
Max Operation Weight - Total29775.7 lb13506 kg
Fuel Capacity90.1 gal341 L
Cooling System Fluid Capacity10.6 gal40 L
Transmission Fluid Capacity6.7 gal25 L
Rear Diff/Final Drive Fluid Capacity7.7 gal29 L
Circle Gearbox Fluid Capacity0.8 gal2.8 L
Tandem Case Fluid Capacity (Each)7.7 gal29 L
Tire Size14x24 12 ply G214x24 12 ply G2
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Steering
Articulation Angle25 degrees25 degrees
Turning Radius23786.1 ft7250 m
Transmission
Transmission Typedirect drive, power shiftdirect drive, power shift
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward26.7 mph42.9 km/h
Max Speed - Reverse18.7 mph30 km/h
Front Axle
Wheel Lean25 degrees25 degrees
Oscillation - Total20 degrees20 degrees
Ground Clearance2.1 ft610 mm
Moldboard
Moldboard Width12.1 ft3658 mm
Moldboard Height24.5 in622 mm
Moldboard Thickness0.9 in22 mm
Max Depth Of Cut28 in711 mm
Side Shift Left21 in533 mm
Side Shift Right27.1 in686 mm
Blade Down Pressure14627.7 lb6635 kg
Hydraulic System
Pump Typefull hydraulic, load sending, variable displacement pistonfull hydraulic, load sending, variable displacement piston
Pump Flow50.5 gal/min191.2 L/min
Relief Valve Pressure2600 psi17926.4 kPa
Circle
Diameter69.1 in1753 mm
Rotation360 degrees360 degrees
Max Reach Outside Tires - Left77.9 in1978 mm
Max Reach Outside Tires - Right85.6 in2174 mm
Max Lift Above Ground17.6 in445 mm
Blade Tip Angle - Front42 degrees42 degrees
Blade Tip Angle - Rear5 degrees5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.