- Overall Length: 28.07 ft / 8555 mm
- Width Over Tires: 8.7 ft / 2650 mm
- Wheelbase: 20.41 ft / 6219 mm
- Rear Ground Clearance: 1.25 ft / 378 mm
Published dimensions and weight
New Holland G200
Rated at 205 hp, the New Holland G200 is a motor grader.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total37738 lb17117.7 kg
03Selected published values57
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for New Holland G200 include published moldboard width of 14 ft / 4267.2 mm, published maximum power of 205 hp / 152.9 kw, published operating weight of 37738 lb / 17117.7 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (28.07 ft / 8555 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.7 ft / 2650 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.41 ft / 6219 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length28.07 ft8555 mm
Width Over Tires8.7 ft2650 mm
Wheelbase20.41 ft6219 mm
Rear Ground Clearance1.25 ft378 mm
Tandem Axle Wheelbase5.26 ft1602 mm
Front Ground Clearance2.05 ft622 mm
Blade Base8.41 ft2562 mm
Height To Top Of Isomount Cab10.31 ft3140 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelQSB 6.7LQSB 6.7L
Power Measured @2200 rpm2200 rpm
Torque Measured @1600 rpm1600 rpm
Max Power205 hp152.9 kw
Net Power Gears 7-8205 hp152.9 kw
Net Torque Gears 7-8650 lb ft881.3 Nm
Displacement409 cu in6.8 L
AspirationTurbochargedTurbocharged
Operational
Std Operation Weight - Front Axle11250 lb5103 kg
Hydraulic System Fluid Capacity47.5 gal179.9 L
Std Operation Weight - Rear Axle26488 lb12014.8 kg
Std Operation Weight - Total37738 lb17117.7 kg
Fuel Capacity90 gal340.7 L
Cooling System Fluid Capacity10.5 gal39.8 L
Transmission Fluid Capacity5.8 gal22 L
Rear Diff/Final Drive Fluid Capacity3.2 gal12.2 L
Circle Gearbox Fluid Capacity0.8 gal2.9 L
Tandem Case Fluid Capacity (Each)6 gal22.8 L
Tire Size14.00x24 10 Ply G214.00x24 10 Ply G2
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Steering
Articulation Angle25 degrees25 degrees
Turning Radius23914.1 ft7289 m
Transmission
Transmission TypeFull power shift direct driveFull power shift direct drive
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward26.7 mph43 km/h
Max Speed - Reverse19 mph30.6 km/h
Front Axle
Wheel Lean17.5 degrees17.5 degrees
Oscillation - Total19 degrees19 degrees
Ground Clearance2.1 ft622 mm
Moldboard
Moldboard Width14 ft4267.2 mm
Moldboard Height24.5 in622 mm
Moldboard Thickness0.9 in22 mm
Side Shift Left21 in533 mm
Side Shift Right28 in711 mm
Blade Down Pressure19391 lb8795.7 kg
Hydraulic System
Pump TypePiston pump, variable displacementPiston pump, variable displacement
Pump Flow49 gal/min185.5 L/min
Relief Valve Pressure2600 psi17926.4 kPa
Circle
Diameter69.1 in1753 mm
Rotation360 degrees360 degrees
Max Reach Outside Tires - Left77.9 in1978 mm
Max Reach Outside Tires - Right85.6 in2174 mm
Max Lift Above Ground17.6 in445 mm
Blade Tip Angle - Front42 degrees42 degrees
Blade Tip Angle - Rear5 degrees5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.