- Overall Length: 29.17 ft / 8888 mm
- Width Over Tires: 7.64 ft / 2327 mm
- Wheelbase: 17.21 ft / 5243 mm
- Rear Ground Clearance: 1.01 ft / 307 mm
Published dimensions and weight
New Holland F106.6A
The New Holland F106.6A is a motor grader built around the CNH 4-Stroke Diesel Engine engine (135 hp).
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total23435.2 lb10630 kg
03Selected published values53
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for New Holland F106.6A include published moldboard width of 11.1 ft / 3355 mm, published maximum power of 135 hp / 100.7 kw, published operating weight of 23435.2 lb / 10630 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (29.17 ft / 8888 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (7.64 ft / 2327 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (17.21 ft / 5243 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length29.17 ft8888 mm
Width Over Tires7.64 ft2327 mm
Wheelbase17.21 ft5243 mm
Rear Ground Clearance1.01 ft307 mm
Tandem Axle Wheelbase4.11 ft1250 mm
Front Ground Clearance0.45 ft136 mm
Blade Base6.5 ft1981 mm
Height To Top Of Isomount Cab10.45 ft3184 mm
Engine
Number Of Cylinders66
Engine ModelCNH 4-Stroke Diesel EngineCNH 4-Stroke Diesel Engine
Power Measured @2100 rpm2100 rpm
Net Power Gear 5-6135 hp100.7 kw
Max Power135 hp100.7 kw
Displacement5880 cu in96.4 L
Aspirationturbocharged, water-cooledturbocharged, water-cooled
Operational
Std Operation Weight - Front Axle6624.9 lb3005 kg
Hydraulic System Fluid Capacity48.9 gal185 L
Std Operation Weight - Rear Axle16810.3 lb7625 kg
Std Operation Weight - Total23435.2 lb10630 kg
Max Operation Weight - Front Axle8377.6 lb3800 kg
Max Operation Weight - Rear Axle18078 lb8200 kg
Oil System Fluid Capacity3.4 gal12.5 L
Max Operation Weight - Total25353.2 lb11500 kg
Fuel Capacity50 gal189 L
Transmission Fluid Capacity5.6 gal21 L
Tandem Case Fluid Capacity (Each)19.6 gal74 L
Tire Size405/70R20405/70R20
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Steering
Articulation Angle28 degrees28 degrees
Turning Radius24442.3 ft7450 m
Transmission
Transmission TypeFull Powershift TransmissionFull Powershift Transmission
Number Of Gears - Forward66
Number Of Gears - Reverse33
Max Speed - Forward23.5 mph37.8 km/h
Max Speed - Reverse17.4 mph27.9 km/h
Front Axle
Wheel Lean22 degrees22 degrees
Oscillation - Total15 degrees15 degrees
Ground Clearance1.7 ft504 mm
Moldboard
Moldboard Width11.1 ft3355 mm
Moldboard Height6 in152 mm
Moldboard Thickness0.8 in19 mm
Max Depth Of Cut17.8 in450 mm
Side Shift Left27.6 in700 mm
Side Shift Right19.7 in500 mm
Hydraulic System
Pump TypeSwash Plate, Variable DisplacementSwash Plate, Variable Displacement
Pump Flow25.1 gal/min95 L/min
Relief Valve Pressure2900.8 psi20000 kPa
Circle
Shift Left27.6 in700 mm
Shift Right19.7 in500 mm
Max Reach Outside Tires - Left84.7 in2150 mm
Max Reach Outside Tires - Right98.1 in2490 mm
Max Lift Above Ground15.8 in400 mm
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.