- Overall Length: 27.96 ft / 8521 mm
- Width Over Tires: 8.24 ft / 2510 mm
- Wheelbase: 20.41 ft / 6219 mm
- Rear Ground Clearance: 2.05 ft / 622 mm
Published dimensions and weight
New Holland G140
The New Holland G140 is a motor grader powered by a 160 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total29918 lb13570.6 kg
03Selected published values56
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for New Holland G140 include published moldboard width of 12 ft / 3657.6 mm, published maximum power of 160 hp / 119.4 kw, published operating weight of 29918 lb / 13570.6 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (27.96 ft / 8521 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.24 ft / 2510 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.41 ft / 6219 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length27.96 ft8521 mm
Width Over Tires8.24 ft2510 mm
Wheelbase20.41 ft6219 mm
Rear Ground Clearance2.05 ft622 mm
Tandem Axle Wheelbase5.23 ft1594 mm
Front Ground Clearance1.25 ft378 mm
Blade Base8.41 ft2562 mm
Height To Top Of Isomount Cab10.31 ft3140 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelQSB 6.7LQSB 6.7L
Power Measured @2200 rpm2200 rpm
Torque Measured @1500 rpm1500 rpm
Max Power160 hp119.4 kw
Net Power Gears 7-8160 hp119.4 kw
Net Torque Gears 7-8550.3 lb ft746 Nm
Displacement408.9 cu in6.7 L
AspirationTurbochargedTurbocharged
Operational
Std Operation Weight - Front Axle8172 lb3706.8 kg
Hydraulic System Fluid Capacity47.5 gal179.9 L
Std Operation Weight - Rear Axle21746 lb9863.9 kg
Std Operation Weight - Total29918 lb13570.6 kg
Fuel Capacity90 gal340.7 L
Cooling System Fluid Capacity10.5 gal39.8 L
Transmission Fluid Capacity4.7 gal17.8 L
Circle Gearbox Fluid Capacity0.8 gal2.9 L
Tandem Case Fluid Capacity (Each)7.7 gal29.2 L
Tire Size14.00X24 10 Ply G214.00X24 10 Ply G2
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Steering
Articulation Angle25 degrees25 degrees
Turning Radius23786.1 ft7250 m
Transmission
Transmission TypeFull power shift direct driveFull power shift direct drive
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward26.6 mph42.9 km/h
Max Speed - Reverse17.7 mph28.5 km/h
Front Axle
Wheel Lean17.5 degrees17.5 degrees
Oscillation - Total19 degrees19 degrees
Ground Clearance2.1 ft622 mm
Moldboard
Moldboard Width12 ft3657.6 mm
Moldboard Height24.5 in622 mm
Moldboard Thickness0.9 in22 mm
Side Shift Left21 in533 mm
Side Shift Right28 in711 mm
Blade Down Pressure14788 lb6707.8 kg
Hydraulic System
Pump TypePiston pump, variable displacementPiston pump, variable displacement
Pump Flow49 gal/min185.5 L/min
Relief Valve Pressure2600 psi17926.4 kPa
Circle
Diameter69.1 in1753 mm
Rotation360 degrees360 degrees
Max Reach Outside Tires - Left77.9 in1978 mm
Max Reach Outside Tires - Right85.6 in2174 mm
Max Lift Above Ground17.6 in445 mm
Blade Tip Angle - Front5 degrees5 degrees
Blade Tip Angle - Rear42 degrees42 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.