- Overall Length: 28.07 ft / 8555 mm
- Width Over Tires: 8.7 ft / 2650 mm
- Wheelbase: 20.41 ft / 6219 mm
- Rear Ground Clearance: 2.01 ft / 610 mm
Published dimensions and weight
New Holland F200
The New Holland F200 is a motor grader; its full manufacturer specification sheet appears below.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02WeightNot publishedNot published
03Selected published values55
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for New Holland F200 include published moldboard width of 14 ft / 4267 mm, the published “Overall Length” field of 28.07 ft / 8555 mm, the published “Width Over Tires” field of 8.7 ft / 2650 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (28.07 ft / 8555 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.7 ft / 2650 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.41 ft / 6219 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length28.07 ft8555 mm
Width Over Tires8.7 ft2650 mm
Wheelbase20.41 ft6219 mm
Rear Ground Clearance2.01 ft610 mm
Tandem Axle Wheelbase5.26 ft1602 mm
Blade Base8.41 ft2562 mm
Height To Top Of Isomount Cab10.96 ft3340 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine Model6 CTAA 8.3 Tier 26 CTAA 8.3 Tier 2
Power Measured @2200 rpm2200 rpm
Net Torque Gears 7-8200 lb ft271.2 Nm
Displacement506.5 cu in8.3 L
Aspirationturbochargedturbocharged
Operational
Hydraulic System Fluid Capacity25.3 gal95.6 L
Max Operation Weight - Front Axle11250.2 lb5103 kg
Max Operation Weight - Rear Axle26779.6 lb12147 kg
Max Operation Weight - Total38029.8 lb17250 kg
Oil System Fluid Capacity5.1 gal19 L
Fuel Capacity90.1 gal341 L
Cooling System Fluid Capacity10.6 gal40 L
Transmission Fluid Capacity5.9 gal22 L
Rear Diff/Final Drive Fluid Capacity6.7 gal25 L
Circle Gearbox Fluid Capacity0.8 gal3 L
Tandem Case Fluid Capacity (Each)6.1 gal23 L
Tire Size14.00 x 24 (10PR)14.00 x 24 (10PR)
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Steering
Articulation Angle25 degrees25 degrees
Turning Radius24 ft7.3 m
Transmission
Transmission TypeDirect Drive PowerShiftDirect Drive PowerShift
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward26.8 mph43 km/h
Max Speed - Reverse19.1 mph30.6 km/h
Front Axle
Wheel Lean18 degrees18 degrees
Oscillation - Total19 degrees19 degrees
Ground Clearance2.1 ft622 mm
Moldboard
Moldboard Width14 ft4267 mm
Moldboard Height26.5 in671 mm
Moldboard Thickness0.9 in22 mm
Max Depth Of Cut28.1 in712 mm
Side Shift Left21 in533 mm
Side Shift Right27.1 in686 mm
Blade Down Pressure23997.4 lb10885 kg
Hydraulic System
Pump TypeFull Hydraulic Load SensingFull Hydraulic Load Sensing
Pump Flow49.2 gal/min186 L/min
Relief Valve Pressure2596.2 psi17900 kPa
Circle
Diameter69.1 in1753 mm
Rotation360 degrees360 degrees
Max Reach Outside Tires - Left77.9 in1978 mm
Max Reach Outside Tires - Right85.6 in2174 mm
Max Lift Above Ground17.6 in445 mm
Blade Tip Angle - Front40 degrees40 degrees
Blade Tip Angle - Rear5 degrees5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.