- Overall Length: 27.96 ft / 8521 mm
- Width Over Tires: 8.24 ft / 2510 mm
- Wheelbase: 20.41 ft / 6219 mm
- Rear Ground Clearance: 2.01 ft / 610 mm
Published dimensions and weight
New Holland F140
Manufacturer specifications for the New Holland F140, a motor grader, are listed below.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02WeightNot publishedNot published
03Selected published values53
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for New Holland F140 include published moldboard width of 12.1 ft / 3658 mm, the published “Overall Length” field of 27.96 ft / 8521 mm, the published “Width Over Tires” field of 8.24 ft / 2510 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (27.96 ft / 8521 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.24 ft / 2510 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.41 ft / 6219 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length27.96 ft8521 mm
Width Over Tires8.24 ft2510 mm
Wheelbase20.41 ft6219 mm
Rear Ground Clearance2.01 ft610 mm
Tandem Axle Wheelbase5.23 ft1594 mm
Blade Base8.41 ft2562 mm
Height To Top Of Isomount Cab10.96 ft3340 mm
Engine
Engine Make23472347
Engine Model6BTA5.9 Tier 16BTA5.9 Tier 1
Power Measured @2200 rpm2200 rpm
Net Torque Gears 7-8104 lb ft141.1 Nm
Displacement360.1 cu in5.9 L
Aspirationturbochargedturbocharged
Operational
Hydraulic System Fluid Capacity25 gal94.6 L
Max Operation Weight - Front Axle8172.6 lb3707 kg
Max Operation Weight - Rear Axle21667.1 lb9828 kg
Max Operation Weight - Total29839.6 lb13535 kg
Oil System Fluid Capacity3.8 gal14.2 L
Fuel Capacity89.9 gal340 L
Cooling System Fluid Capacity10.6 gal40 L
Transmission Fluid Capacity6.7 gal25 L
Circle Gearbox Fluid Capacity0.8 gal2.8 L
Tandem Case Fluid Capacity (Each)8 gal30 L
Tire Size13.00 x 24 (12PR)13.00 x 24 (12PR)
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Steering
Articulation Angle25 degrees25 degrees
Turning Radius24 ft7.3 m
Transmission
Transmission TypeDirect Drive Power-ShiftDirect Drive Power-Shift
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward26.8 mph43 km/h
Max Speed - Reverse17.8 mph28.5 km/h
Front Axle
Wheel Lean18 degrees18 degrees
Oscillation - Total19 degrees19 degrees
Ground Clearance2.1 ft622 mm
Moldboard
Moldboard Width12.1 ft3658 mm
Moldboard Height24.5 in622 mm
Moldboard Thickness0.9 in22 mm
Max Depth Of Cut28.1 in712 mm
Side Shift Left21 in533 mm
Side Shift Right27.1 in686 mm
Blade Down Pressure19039.2 lb8636 kg
Hydraulic System
Pump TypeFull Hydraulic Load SensingFull Hydraulic Load Sensing
Pump Flow50.8 gal/min192 L/min
Relief Valve Pressure2596.2 psi17900 kPa
Circle
Diameter69.1 in1753 mm
Rotation360 degrees360 degrees
Max Reach Outside Tires - Left62.3 in1582 mm
Max Reach Outside Tires - Right68.6 in1742 mm
Max Lift Above Ground17.5 in444 mm
Blade Tip Angle - Front40 degrees40 degrees
Blade Tip Angle - Rear5 degrees5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.