- Dump Clearance At Max Raise: 7.17 ft / 2185 mm
- Bucket Capacity - Heaped: 0.53 yd3 / 0.4 m3
- Bucket Capacity - Struck: 0.42 yd3 / 0.32 m3
- Bucket Width: 5.42 ft / 1650 mm
Published dimensions and weight
Zettelmeyer ZL8C
The Zettelmeyer ZL8C is a wheel loader of about 2.9 t, powered by a 34.9 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale

01Dimensions referenceLength × width × height
02Operating Weight6459.6 lb2930 kg
03Selected published values31
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Zettelmeyer ZL8C include published bucket capacity of 0.53 yd3 / 0.4 m3, published breakout force of 562022.31 lb / 2500 kN, published operating weight of 6459.6 lb / 2930 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (7.17 ft / 2185 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (0.53 yd3 / 0.4 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (0.42 yd3 / 0.32 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise7.17 ft2185 mm
Bucket Capacity - Heaped0.53 yd30.4 m3
Bucket Capacity - Struck0.42 yd30.32 m3
Bucket Width5.42 ft1650 mm
Breakout Force562022.31 lb2500 kN
Dimensions
Ground Clearance0.94 ft285 mm
Length With Bucket On Ground14.21 ft4330 mm
Width Over Tires5.45 ft1660 mm
Height To Top Of Cab8.19 ft2495 mm
Wheelbase5.91 ft1800 mm
Hinge Pin - Max Height8.86 ft2700 mm
Reach At Max Lift And Dump1.89 ft575 mm
Engine
Number Of Cylinders22
Engine Make23492349
Gross Power34.9 hp26 kw
Power Measured @3000 rpm3000 rpm
Aspirationnaturalnatural
Operational
Operating Weight6459.6 lb2930 kg
Fuel Capacity11.9 gal45 L
Hydraulic System Fluid Capacity11.9 gal45 L
Static Tipping Weight5247.1 lb2380 kg
Turning Radius11.5 ft3500 mm
Operating Voltage12 V12 V
Rear Axle Oscillation25 degrees25 degrees
Tire Size10.5-1810.5-18
Transmission
Transmission Typehydrostatic, reversibe and shiftablehydrostatic, reversibe and shiftable
Max Speed - Forward11.9 mph19 km/h
Hydraulic System
Relief Valve Setting2610.7 psi18000 kPa
Raise Time6 sec6 sec
Lower Time6.5 sec6.5 sec
Pump Typegear pumpgear pump
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.