- Dump Clearance At Max Raise: 11.16 ft / 3400 mm
- Breakout Force: 53279.72 lb / 237 kN
- Bucket Capacity - Heaped: 3.54 yd3 / 2.7 m3
- Bucket Capacity - Struck: 3.01 yd3 / 2.3 m3
Published dimensions and weight
Zettelmeyer ZL3002
The Zettelmeyer ZL3002 pairs the 6CT 8.3 engine (197 hp) with an operating weight near 19 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight41887.9 lb19000 kg
03Selected published values45
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Zettelmeyer ZL3002 include published bucket capacity of 3.54 yd3 / 2.7 m3, published breakout force of 53279.72 lb / 237 kN, published operating weight of 41887.9 lb / 19000 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (11.16 ft / 3400 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Breakout Force” field (53279.72 lb / 237 kN) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (3.54 yd3 / 2.7 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise11.16 ft3400 mm
Breakout Force53279.72 lb237 kN
Bucket Capacity - Heaped3.54 yd32.7 m3
Bucket Capacity - Struck3.01 yd32.3 m3
Bucket Width9.85 ft3000 mm
Dimensions
Ground Clearance1.45 ft440 mm
Length With Bucket On Ground26.78 ft8160 mm
Height To Top Of Cab11.32 ft3450 mm
Wheelbase11.65 ft3550 mm
Hinge Pin - Max Height14.28 ft4350 mm
Reach At Max Lift And Dump3.12 ft950 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine Model6CT 8.36CT 8.3
Net Power197 hp147 kw
Gross Power208 hp155.2 kw
Power Measured @2100 rpm2100 rpm
Max Torque560.6 lb ft760 Nm
Displacement504.7 cu in8.3 L
Torque Measured @1500 rpm1500 rpm
Aspirationturbochargedturbocharged
Operational
Operating Weight41887.9 lb19000 kg
Fuel Capacity95.2 gal360 L
Hydraulic System Fluid Capacity60.8 gal230 L
Engine Oil Fluid Capacity5.1 gal19 L
Transmission Fluid Capacity7.4 gal28 L
Front Axle/Diff Fluid Capacity8.2 gal31 L
Rear Axle/Diff Fluid Capacity8.2 gal31 L
Static Tipping Weight34612.6 lb15700 kg
Turning Radius22.5 ft6850 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage65 amps65 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size23.5-25 16PR23.5-25 16PR
Transmission
Transmission Typefull powershiftfull powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward21.8 mph35 km/h
Max Speed - Reverse13.4 mph21.5 km/h
Hydraulic System
Relief Valve Setting3335.9 psi23000 kPa
Pump Flow Capacity78.8 gal/min298 L/min
Raise Time6.5 sec6.5 sec
Dump Time1.7 sec1.7 sec
Lower Time4.6 sec4.6 sec
Pump Typetandem axial pistontandem axial piston
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.