- Dump Clearance At Max Raise: 6.6 ft / 2010 mm
- Bucket Capacity - Heaped: 0.4 yd3 / 0.3 m3
- Bucket Width: 4.43 ft / 1350 mm
- Breakout Force: 4383.78 lb / 19.5 kN
Published dimensions and weight
Zettelmeyer ZL302
The Zettelmeyer ZL302 is a 1.9 t-class wheel loader with a 28.2 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight4188.8 lb1900 kg
03Selected published values43
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Zettelmeyer ZL302 include published bucket capacity of 0.4 yd3 / 0.3 m3, published breakout force of 4383.78 lb / 19.5 kN, published operating weight of 4188.8 lb / 1900 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (6.6 ft / 2010 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (0.4 yd3 / 0.3 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (4.43 ft / 1350 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise6.6 ft2010 mm
Bucket Capacity - Heaped0.4 yd30.3 m3
Bucket Width4.43 ft1350 mm
Breakout Force4383.78 lb19.5 kN
Dimensions
Ground Clearance0.76 ft230 mm
Length With Bucket On Ground12.93 ft3940 mm
Width Over Tires4.24 ft1290 mm
Height To Top Of Cab7.58 ft2310 mm
Wheelbase4.93 ft1500 mm
Hinge Pin - Max Height8.34 ft2540 mm
Reach At Max Lift And Dump1.51 ft460 mm
Engine
Number Of Cylinders44
Engine ModelKHD F4 M 1008KHD F4 M 1008
Net Power28.2 hp21 kw
Gross Power29.6 hp22 kw
Power Measured @3000 rpm3000 rpm
Max Torque56.1 lb ft76 Nm
Displacement74.5 cu in1.3 L
Torque Measured @1850 rpm1850 rpm
Aspirationindirect injectionindirect injection
Operational
Operating Weight4188.8 lb1900 kg
Fuel Capacity10.1 gal38 L
Hydraulic System Fluid Capacity7.4 gal28 L
Engine Oil Fluid Capacity1.2 gal4.3 L
Front Axle/Diff Fluid Capacity1.4 gal5 L
Rear Axle/Diff Fluid Capacity1.6 gal6 L
Static Tipping Weight2866.1 lb1300 kg
Turning Radius9.9 ft3000 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage65 amps65 amps
Rear Axle Oscillation20 degrees20 degrees
Tire Size10.0/75-15.310.0/75-15.3
Transmission
Transmission Typehydrostatic full power shifthydrostatic full power shift
Number Of Forward Gears11
Number Of Reverse Gears11
Max Speed - Forward12.5 mph20 km/h
Max Speed - Reverse12.5 mph20 km/h
Hydraulic System
Relief Valve Setting2900 psi19994.8 kPa
Pump Flow Capacity5.6 gal/min21 L/min
Raise Time6 sec6 sec
Dump Time2.5 sec2.5 sec
Lower Time3 sec3 sec
Pump Typegear typegear type
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.