- Dump Clearance At Max Raise: 8.91 ft / 2715 mm
- Bucket Capacity - Heaped: 1.57 yd3 / 1.2 m3
- Bucket Width: 7.39 ft / 2250 mm
- Breakout Force: 14500.18 lb / 64.5 kN
Published dimensions and weight
Zettelmeyer ZL1002i
The Zettelmeyer ZL1002i is a wheel loader of about 7.6 t, built around the KHD BF 4M 1013 E engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale

01Dimensions referenceLength × width × height
02Operating Weight16755.2 lb7600 kg
03Selected published values43
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Zettelmeyer ZL1002i include published bucket capacity of 1.57 yd3 / 1.2 m3, published breakout force of 14500.18 lb / 64.5 kN, published operating weight of 16755.2 lb / 7600 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.91 ft / 2715 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.57 yd3 / 1.2 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (7.39 ft / 2250 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.91 ft2715 mm
Bucket Capacity - Heaped1.57 yd31.2 m3
Bucket Width7.39 ft2250 mm
Breakout Force14500.18 lb64.5 kN
Dimensions
Ground Clearance1.94 ft590 mm
Length With Bucket On Ground18.97 ft5780 mm
Width Over Tires7.09 ft2160 mm
Height To Top Of Cab9.39 ft2860 mm
Wheelbase7.88 ft2400 mm
Hinge Pin - Max Height11.39 ft3470 mm
Reach At Max Lift And Dump2.63 ft800 mm
Engine
Number Of Cylinders44
Engine ModelKHD BF 4M 1013 EKHD BF 4M 1013 E
Net Power88 hp65.7 kw
Gross Power92 hp68.7 kw
Power Measured @2100 rpm2100 rpm
Max Torque289.2 lb ft392 Nm
Displacement290.5 cu in4.8 L
Torque Measured @1400 rpm1400 rpm
Aspirationturbo + water cooledturbo + water cooled
Operational
Operating Weight16755.2 lb7600 kg
Fuel Capacity26.5 gal100 L
Hydraulic System Fluid Capacity29.1 gal110 L
Engine Oil Fluid Capacity3.2 gal12 L
Front Axle/Diff Fluid Capacity3.4 gal12.5 L
Rear Axle/Diff Fluid Capacity3.6 gal13.3 L
Static Tipping Weight11684.6 lb5300 kg
Turning Radius15.8 ft4800 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage55 amps55 amps
Rear Axle Oscillation20 degrees20 degrees
Tire Size15.5-2515.5-25
Transmission
Transmission Typehydrostatic full power shifthydrostatic full power shift
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward12.5 mph20 km/h
Max Speed - Reverse12.5 mph20 km/h
Hydraulic System
Relief Valve Setting3335.9 psi23000 kPa
Pump Flow Capacity28.1 gal/min106 L/min
Raise Time6 sec6 sec
Dump Time1.5 sec1.5 sec
Lower Time5 sec5 sec
Pump Typeaxial pistonaxial piston
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.