- Dump Clearance At Max Raise: 9.65 ft / 2940 mm
- Breakout Force: 31136.04 lb / 138.5 kN
- Bucket Capacity - Heaped: 3.27 yd3 / 2.5 m3
- Bucket Capacity - Struck: 2.88 yd3 / 2.21 m3
Published dimensions and weight
Zettelmeyer ZL2002
The Zettelmeyer ZL2002 is a wheel loader of about 13 t, built around the 6 BTA 5.9 engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight28660.1 lb13000 kg
03Selected published values45
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Zettelmeyer ZL2002 include published bucket capacity of 3.27 yd3 / 2.5 m3, published breakout force of 31136.04 lb / 138.5 kN, published operating weight of 28660.1 lb / 13000 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.65 ft / 2940 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Breakout Force” field (31136.04 lb / 138.5 kN) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (3.27 yd3 / 2.5 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.65 ft2940 mm
Breakout Force31136.04 lb138.5 kN
Bucket Capacity - Heaped3.27 yd32.5 m3
Bucket Capacity - Struck2.88 yd32.21 m3
Bucket Width8.54 ft2600 mm
Dimensions
Ground Clearance1.45 ft440 mm
Length With Bucket On Ground23.46 ft7150 mm
Height To Top Of Cab10.27 ft3130 mm
Wheelbase9.85 ft3000 mm
Hinge Pin - Max Height12.64 ft3850 mm
Reach At Max Lift And Dump3.55 ft1080 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine Model6 BTA 5.96 BTA 5.9
Net Power166 hp123.8 kw
Gross Power178 hp132.8 kw
Power Measured @2300 rpm2300 rpm
Max Torque450 lb ft610 Nm
Displacement358.9 cu in5.9 L
Torque Measured @1500 rpm1500 rpm
Aspirationturbo + aftercooledturbo + aftercooled
Operational
Operating Weight28660.1 lb13000 kg
Fuel Capacity60.8 gal230 L
Hydraulic System Fluid Capacity45 gal170 L
Engine Oil Fluid Capacity4.3 gal16 L
Transmission Fluid Capacity7.4 gal28 L
Front Axle/Diff Fluid Capacity6.9 gal26 L
Rear Axle/Diff Fluid Capacity6.9 gal26 L
Static Tipping Weight23765.9 lb10780 kg
Turning Radius19.2 ft5850 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage65 amps65 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size20.5-25 16PR20.5-25 16PR
Transmission
Transmission Typefull powershiftfull powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23.7 mph38 km/h
Max Speed - Reverse15.6 mph25 km/h
Hydraulic System
Relief Valve Setting3335.9 psi23000 kPa
Pump Flow Capacity60.8 gal/min230 L/min
Raise Time6 sec6 sec
Dump Time1.6 sec1.6 sec
Lower Time4.5 sec4.5 sec
Pump Typetandem axial pistontandem axial piston
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.