- Dump Clearance At Max Raise: 8.99 ft / 2740 mm
- Bucket Capacity - Heaped: 1.31 yd3 / 1 m3
- Bucket Width: 6.73 ft / 2050 mm
- Breakout Force: 14162.97 lb / 63 kN
Published dimensions and weight
Zettelmeyer ZL802Si
The Zettelmeyer ZL802Si is a wheel loader of about 7.2 t; its KHD BF 4M 1012 E engine is rated at 80 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight15873.3 lb7200 kg
03Selected published values43
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Zettelmeyer ZL802Si include published bucket capacity of 1.31 yd3 / 1 m3, published breakout force of 14162.97 lb / 63 kN, published operating weight of 15873.3 lb / 7200 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.99 ft / 2740 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.31 yd3 / 1 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (6.73 ft / 2050 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.99 ft2740 mm
Bucket Capacity - Heaped1.31 yd31 m3
Bucket Width6.73 ft2050 mm
Breakout Force14162.97 lb63 kN
Dimensions
Ground Clearance1.88 ft570 mm
Length With Bucket On Ground17.97 ft5475 mm
Width Over Tires6.53 ft1990 mm
Height To Top Of Cab9.39 ft2860 mm
Wheelbase7.39 ft2250 mm
Hinge Pin - Max Height11.39 ft3470 mm
Reach At Max Lift And Dump2.55 ft775 mm
Engine
Number Of Cylinders44
Engine ModelKHD BF 4M 1012 EKHD BF 4M 1012 E
Net Power80 hp59.7 kw
Gross Power83 hp61.9 kw
Power Measured @2300 rpm2300 rpm
Max Torque221.3 lb ft300 Nm
Displacement195.3 cu in3.2 L
Torque Measured @1500 rpm1500 rpm
Aspirationturbo + water cooledturbo + water cooled
Operational
Operating Weight15873.3 lb7200 kg
Fuel Capacity26.5 gal100 L
Hydraulic System Fluid Capacity29.1 gal110 L
Engine Oil Fluid Capacity2.4 gal9 L
Front Axle/Diff Fluid Capacity2.3 gal8.7 L
Rear Axle/Diff Fluid Capacity3.1 gal11.5 L
Static Tipping Weight9634.3 lb4370 kg
Turning Radius14.7 ft4480 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage55 amps55 amps
Rear Axle Oscillation20 degrees20 degrees
Tire Size15.5-2515.5-25
Transmission
Transmission Typehydrostatic full power shifthydrostatic full power shift
Number Of Forward Gears33
Number Of Reverse Gears22
Max Speed - Forward21.8 mph35 km/h
Max Speed - Reverse9.1 mph14.5 km/h
Hydraulic System
Relief Valve Setting3045 psi20994.6 kPa
Pump Flow Capacity23.8 gal/min90 L/min
Raise Time6 sec6 sec
Dump Time2 sec2 sec
Lower Time5.5 sec5.5 sec
Pump Typegear typegear type
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.