- Dump Clearance At Max Raise: 8.8 ft / 2680 mm
- Bucket Capacity - Heaped: 1.31 yd3 / 1 m3
- Bucket Width: 6.73 ft / 2050 mm
- Breakout Force: 12476.9 lb / 55.5 kN
Published dimensions and weight
Zettelmeyer ZL802i
The Zettelmeyer ZL802i is a 7.3 t-class wheel loader with a 75 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight16093.8 lb7300 kg
03Selected published values43
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Zettelmeyer ZL802i include published bucket capacity of 1.31 yd3 / 1 m3, published breakout force of 12476.9 lb / 55.5 kN, published operating weight of 16093.8 lb / 7300 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.8 ft / 2680 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.31 yd3 / 1 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (6.73 ft / 2050 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.8 ft2680 mm
Bucket Capacity - Heaped1.31 yd31 m3
Bucket Width6.73 ft2050 mm
Breakout Force12476.9 lb55.5 kN
Dimensions
Ground Clearance1.88 ft570 mm
Length With Bucket On Ground18.38 ft5600 mm
Width Over Tires6.53 ft1990 mm
Height To Top Of Cab9.39 ft2860 mm
Wheelbase7.39 ft2250 mm
Hinge Pin - Max Height11.39 ft3470 mm
Reach At Max Lift And Dump2.86 ft870 mm
Engine
Number Of Cylinders44
Engine ModelKHD BF 4M 1012 EKHD BF 4M 1012 E
Net Power75 hp56 kw
Gross Power78 hp58.2 kw
Power Measured @2100 rpm2100 rpm
Max Torque221.3 lb ft300 Nm
Displacement195.3 cu in3.2 L
Torque Measured @1500 rpm1500 rpm
Aspirationturbo + water cooledturbo + water cooled
Operational
Operating Weight16093.8 lb7300 kg
Fuel Capacity26.5 gal100 L
Hydraulic System Fluid Capacity29.1 gal110 L
Engine Oil Fluid Capacity2.4 gal9 L
Front Axle/Diff Fluid Capacity2.3 gal8.7 L
Rear Axle/Diff Fluid Capacity3.1 gal11.5 L
Static Tipping Weight9700.4 lb4400 kg
Turning Radius14.9 ft4525 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage55 amps55 amps
Rear Axle Oscillation20 degrees20 degrees
Tire Size15.5-2515.5-25
Transmission
Transmission Typehydrostatic full power shifthydrostatic full power shift
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward12.5 mph20 km/h
Max Speed - Reverse12.5 mph20 km/h
Hydraulic System
Relief Valve Setting3045 psi20994.6 kPa
Pump Flow Capacity21.7 gal/min82 L/min
Raise Time6.5 sec6.5 sec
Dump Time2 sec2 sec
Lower Time6 sec6 sec
Pump Typegear typegear type
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.