- Dump Clearance At Max Raise: 8.35 ft / 2545 mm
- Bucket Capacity - Heaped: 1.31 yd3 / 1 m3
- Bucket Width: 6.73 ft / 2050 mm
- Breakout Force: 13488.54 lb / 60 kN
Published dimensions and weight
Zettelmeyer ZL801B
The Zettelmeyer ZL801B is a wheel loader of about 5.7 t, powered by a 68.4 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight12588 lb5709.9 kg
03Selected published values44
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Zettelmeyer ZL801B include published bucket capacity of 1.31 yd3 / 1 m3, published breakout force of 13488.54 lb / 60 kN, published operating weight of 12588 lb / 5709.9 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.35 ft / 2545 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.31 yd3 / 1 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (6.73 ft / 2050 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.35 ft2545 mm
Bucket Capacity - Heaped1.31 yd31 m3
Bucket Width6.73 ft2050 mm
Breakout Force13488.54 lb60 kN
Dimensions
Ground Clearance1.71 ft520 mm
Length With Bucket On Ground17.72 ft5400 mm
Width Over Tires6.29 ft1916 mm
Height To Top Of Cab9.62 ft2930 mm
Wheelbase6.89 ft2100 mm
Hinge Pin - Max Height10.5 ft3200 mm
Reach At Max Lift And Dump2.56 ft780 mm
Engine
Number Of Cylinders44
Engine Make23492349
Engine ModelBF 4L 1011TBF 4L 1011T
Net Power68.4 hp51 kw
Gross Power69.8 hp52 kw
Power Measured @2650 rpm2650 rpm
Max Torque158.6 lb ft215 Nm
Displacement166.6 cu in2.8 L
Torque Measured @1600 rpm1600 rpm
Aspirationturbochargedturbocharged
Operational
Operating Weight12588 lb5709.9 kg
Fuel Capacity25.1 gal95 L
Hydraulic System Fluid Capacity19.9 gal75 L
Engine Oil Fluid Capacity2.8 gal10.5 L
Front Axle/Diff Fluid Capacity2.3 gal8.7 L
Rear Axle/Diff Fluid Capacity3 gal11 L
Static Tipping Weight9171.3 lb4160 kg
Turning Radius14.1 ft4285 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage60 amps60 amps
Rear Axle Oscillation26 degrees26 degrees
Tire Size14.5-2014.5-20
Transmission
Transmission Typehydrostatic full powershifthydrostatic full powershift
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward12.5 mph20 km/h
Max Speed - Reverse12.5 mph20 km/h
Hydraulic System
Relief Valve Setting3150 psi21718.5 kPa
Pump Flow Capacity22.5 gal/min85 L/min
Raise Time6 sec6 sec
Dump Time1 sec1 sec
Lower Time3.5 sec3.5 sec
Pump Typegear type tandemgear type tandem
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.