- Dump Clearance At Max Raise: 8.11 ft / 2470 mm
- Bucket Capacity - Heaped: 1.05 yd3 / 0.8 m3
- Bucket Width: 5.75 ft / 1750 mm
- Breakout Force: 9104.77 lb / 40.5 kN
Published dimensions and weight
Zettelmeyer ZL602B
Weighing roughly 4.6 t and rated at 57 hp, the Zettelmeyer ZL602B is a wheel loader in its size class.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight10141.3 lb4600 kg
03Selected published values43
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Zettelmeyer ZL602B include published bucket capacity of 1.05 yd3 / 0.8 m3, published breakout force of 9104.77 lb / 40.5 kN, published operating weight of 10141.3 lb / 4600 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.11 ft / 2470 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.05 yd3 / 0.8 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (5.75 ft / 1750 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.11 ft2470 mm
Bucket Capacity - Heaped1.05 yd30.8 m3
Bucket Width5.75 ft1750 mm
Breakout Force9104.77 lb40.5 kN
Dimensions
Ground Clearance1.58 ft480 mm
Length With Bucket On Ground16.9 ft5150 mm
Width Over Tires5.68 ft1730 mm
Height To Top Of Cab8.63 ft2630 mm
Wheelbase6.57 ft2000 mm
Hinge Pin - Max Height10.24 ft3120 mm
Reach At Max Lift And Dump2.33 ft710 mm
Engine
Number Of Cylinders44
Engine Make00
Engine ModelKHD BF4 L 1011 FTKHD BF4 L 1011 FT
Net Power57 hp42.6 kw
Gross Power60 hp44.8 kw
Power Measured @2300 rpm2300 rpm
Max Torque148 lb ft200.7 Nm
Displacement167 cu in2.8 L
Torque Measured @1800 rpm1800 rpm
Aspirationturbo + oil/air cooledturbo + oil/air cooled
Operational
Operating Weight10141.3 lb4600 kg
Fuel Capacity15.9 gal60 L
Hydraulic System Fluid Capacity15.9 gal60 L
Engine Oil Fluid Capacity2.8 gal10.5 L
Front Axle/Diff Fluid Capacity2.7 gal10 L
Rear Axle/Diff Fluid Capacity3 gal11 L
Static Tipping Weight7716.2 lb3500 kg
Turning Radius13.5 ft4090 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage60 amps60 amps
Rear Axle Oscillation20 degrees20 degrees
Tire Size12.5-2012.5-20
Transmission
Transmission Typehydrostatic full power shifthydrostatic full power shift
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward12.5 mph20 km/h
Max Speed - Reverse12.5 mph20 km/h
Hydraulic System
Relief Valve Setting3191 psi22001.2 kPa
Pump Flow Capacity13.8 gal/min52 L/min
Raise Time6 sec6 sec
Dump Time1 sec1 sec
Lower Time3 sec3 sec
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.