- Dump Clearance At Max Raise: 8.21 ft / 2500 mm
- Bucket Capacity - Heaped: 0.92 yd3 / 0.7 m3
- Bucket Width: 5.75 ft / 1750 mm
- Breakout Force: 9037.32 lb / 40.21 kN
Published dimensions and weight
Zettelmeyer ZL502C
The Zettelmeyer ZL502C is a wheel loader of about 4.4 t, built around the KHD F4 L 1011 F engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight9700 lb4399.9 kg
03Selected published values43
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Zettelmeyer ZL502C include published bucket capacity of 0.92 yd3 / 0.7 m3, published breakout force of 9037.32 lb / 40.21 kN, published operating weight of 9700 lb / 4399.9 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.21 ft / 2500 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (0.92 yd3 / 0.7 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (5.75 ft / 1750 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.21 ft2500 mm
Bucket Capacity - Heaped0.92 yd30.7 m3
Bucket Width5.75 ft1750 mm
Breakout Force9037.32 lb40.21 kN
Dimensions
Ground Clearance1.42 ft430 mm
Length With Bucket On Ground16.38 ft4990 mm
Width Over Tires5.68 ft1730 mm
Height To Top Of Cab8.49 ft2585 mm
Wheelbase6.57 ft2000 mm
Hinge Pin - Max Height10.14 ft3090 mm
Reach At Max Lift And Dump2.7 ft820 mm
Engine
Number Of Cylinders44
Engine ModelKHD F4 L 1011 FKHD F4 L 1011 F
Net Power47 hp35.1 kw
Gross Power48 hp35.8 kw
Power Measured @2800 rpm2800 rpm
Max Torque95 lb ft128.9 Nm
Displacement167 cu in2.8 L
Torque Measured @1800 rpm1800 rpm
Aspirationnaturalnatural
Operational
Operating Weight9700 lb4399.9 kg
Fuel Capacity15.9 gal60 L
Hydraulic System Fluid Capacity15.9 gal60 L
Engine Oil Fluid Capacity2.8 gal10.5 L
Front Axle/Diff Fluid Capacity2.7 gal10 L
Rear Axle/Diff Fluid Capacity3 gal11 L
Static Tipping Weight7495.8 lb3400 kg
Turning Radius13.3 ft4050 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage60 amps60 amps
Rear Axle Oscillation20 degrees20 degrees
Tire Size12.5-1812.5-18
Transmission
Transmission Typehydrostatic full power shifthydrostatic full power shift
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward12.5 mph20 km/h
Max Speed - Reverse12.5 mph20 km/h
Hydraulic System
Relief Valve Setting3335 psi22994 kPa
Pump Flow Capacity11.9 gal/min45 L/min
Raise Time6 sec6 sec
Dump Time1 sec1 sec
Lower Time3 sec3 sec
Pump Typecontrol valve 3-spoolcontrol valve 3-spool
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.