- Dump Clearance At Max Raise: 10.6 ft / 3230 mm
- Breakout Force: 54403.76 lb / 242 kN
- Bucket Capacity - Heaped: 5.5 yd3 / 4.2 m3
- Bucket Capacity - Struck: 4.71 yd3 / 3.6 m3
Published dimensions and weight
Zettelmeyer ZL5002
The Zettelmeyer ZL5002 pairs the LTA 10-C 290 engine (276.3 hp) with an operating weight near 23.3 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight51367.8 lb23300 kg
03Selected published values45
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Zettelmeyer ZL5002 include published bucket capacity of 5.5 yd3 / 4.2 m3, published breakout force of 54403.76 lb / 242 kN, published operating weight of 51367.8 lb / 23300 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (10.6 ft / 3230 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Breakout Force” field (54403.76 lb / 242 kN) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (5.5 yd3 / 4.2 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise10.6 ft3230 mm
Breakout Force54403.76 lb242 kN
Bucket Capacity - Heaped5.5 yd34.2 m3
Bucket Capacity - Struck4.71 yd33.6 m3
Bucket Width9.85 ft3000 mm
Dimensions
Ground Clearance1.61 ft490 mm
Length With Bucket On Ground28.97 ft8830 mm
Height To Top Of Cab11.46 ft3490 mm
Wheelbase12.14 ft3700 mm
Hinge Pin - Max Height14.6 ft4450 mm
Reach At Max Lift And Dump3.75 ft1140 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelLTA 10-C 290LTA 10-C 290
Net Power276.3 hp206 kw
Gross Power289.7 hp216 kw
Power Measured @2100 rpm2100 rpm
Max Torque870.4 lb ft1180 Nm
Displacement622.5 cu in10.2 L
Torque Measured @1300 rpm1300 rpm
Aspirationturbocharged + aftercooledturbocharged + aftercooled
Operational
Operating Weight51367.8 lb23300 kg
Fuel Capacity95.2 gal360 L
Hydraulic System Fluid Capacity60.8 gal230 L
Engine Oil Fluid Capacity7.1 gal26.5 L
Transmission Fluid Capacity5.6 gal21 L
Front Axle/Diff Fluid Capacity14.3 gal54 L
Rear Axle/Diff Fluid Capacity13.5 gal51 L
Static Tipping Weight39132.1 lb17750 kg
Turning Radius23.9 ft7260 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage65 amps65 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size26.5R2526.5R25
Transmission
Transmission Typefull powershift countershaftfull powershift countershaft
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23.7 mph38 km/h
Max Speed - Reverse15.6 mph25 km/h
Hydraulic System
Relief Valve Setting3626 psi25000 kPa
Pump Flow Capacity78.8 gal/min298 L/min
Raise Time6.5 sec6.5 sec
Dump Time1.7 sec1.7 sec
Lower Time4.6 sec4.6 sec
Pump Typetandem axial pistontandem axial piston
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.