- Dump Clearance At Max Raise: 10.73 ft / 3270 mm
- Breakout Force: 50582.01 lb / 225 kN
- Bucket Capacity - Heaped: 4.58 yd3 / 3.5 m3
- Bucket Capacity - Struck: 3.93 yd3 / 3 m3
Published dimensions and weight
Zettelmeyer ZL4002
Weighing roughly 21.3 t and rated at 240 hp, the Zettelmeyer ZL4002 is a wheel loader in its size class.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight46958.5 lb21300 kg
03Selected published values45
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Zettelmeyer ZL4002 include published bucket capacity of 4.58 yd3 / 3.5 m3, published breakout force of 50582.01 lb / 225 kN, published operating weight of 46958.5 lb / 21300 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (10.73 ft / 3270 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Breakout Force” field (50582.01 lb / 225 kN) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (4.58 yd3 / 3.5 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise10.73 ft3270 mm
Breakout Force50582.01 lb225 kN
Bucket Capacity - Heaped4.58 yd33.5 m3
Bucket Capacity - Struck3.93 yd33 m3
Bucket Width9.85 ft3000 mm
Dimensions
Ground Clearance1.61 ft490 mm
Length With Bucket On Ground27.43 ft8360 mm
Height To Top Of Cab11.49 ft3500 mm
Wheelbase11.65 ft3550 mm
Hinge Pin - Max Height14.44 ft4400 mm
Reach At Max Lift And Dump3.48 ft1060 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelLT 10-C 250LT 10-C 250
Net Power240 hp179 kw
Gross Power250 hp186.5 kw
Power Measured @2100 rpm2100 rpm
Max Torque743.5 lb ft1008 Nm
Displacement622.5 cu in10.2 L
Torque Measured @1300 rpm1300 rpm
Aspirationturbochargedturbocharged
Operational
Operating Weight46958.5 lb21300 kg
Fuel Capacity95.2 gal360 L
Hydraulic System Fluid Capacity60.8 gal230 L
Engine Oil Fluid Capacity7.1 gal26.5 L
Transmission Fluid Capacity7.4 gal28 L
Front Axle/Diff Fluid Capacity11.1 gal42 L
Rear Axle/Diff Fluid Capacity8.2 gal31 L
Static Tipping Weight37919.6 lb17200 kg
Turning Radius22.7 ft6910 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage65 amps65 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size26.5-25 16PR26.5-25 16PR
Transmission
Transmission Typefull powershift countershaftfull powershift countershaft
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23.7 mph38 km/h
Max Speed - Reverse14.3 mph23 km/h
Hydraulic System
Relief Valve Setting3335.9 psi23000 kPa
Pump Flow Capacity78.8 gal/min298 L/min
Raise Time6.5 sec6.5 sec
Dump Time1.7 sec1.7 sec
Lower Time4.6 sec4.6 sec
Pump Typetandem axial piston pumptandem axial piston pump
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.