- Dump Clearance At Max Raise: 12.42 ft / 3785 mm
- Bucket Capacity - Heaped: 8 yd3 / 6.12 m3
- Bucket Capacity - Struck: 6.63 yd3 / 5.07 m3
- Bucket Width: 13 ft / 3962 mm
Published dimensions and weight
Michigan L320
The Michigan L320 is a 45 t-class wheel loader with a 417 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight99220 lb45005.5 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Michigan L320 include published bucket capacity of 8 yd3 / 6.12 m3, published breakout force of 101600 lb / 452.1 kN, published operating weight of 99220 lb / 45005.5 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (12.42 ft / 3785 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (8 yd3 / 6.12 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (6.63 yd3 / 5.07 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise12.42 ft3785 mm
Bucket Capacity - Heaped8 yd36.12 m3
Bucket Capacity - Struck6.63 yd35.07 m3
Bucket Width13 ft3962 mm
Breakout Force101600 lb452.1 kN
Dimensions
Ground Clearance1.84 ft559 mm
Length With Bucket On Ground34.3 ft10452 mm
Width Over Tires11.92 ft3632 mm
Height To Top Of Cab13.75 ft4191 mm
Wheelbase13.32 ft4059 mm
Hinge Pin - Max Height16.59 ft5055 mm
Reach At Max Lift And Dump5.55 ft1689 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelKTA 19CKTA 19C
Net Power417 hp311 kw
Gross Power452 hp337.1 kw
Power Measured @2100 rpm2100 rpm
Max Torque1597 lb ft2165.3 Nm
Displacement1150 cu in18.9 L
Torque Measured @1500 rpm1500 rpm
Aspirationturbo + aftercooledturbo + aftercooled
Operational
Operating Weight99220 lb45005.5 kg
Fuel Capacity212.2 gal803 L
Hydraulic System Fluid Capacity160.1 gal606 L
Engine Oil Fluid Capacity13.5 gal51.1 L
Cooling System Fluid Capacity35.1 gal132.5 L
Transmission Fluid Capacity18 gal68.1 L
Front Axle/Diff Fluid Capacity18 gal68.1 L
Rear Axle/Diff Fluid Capacity18 gal68.1 L
Static Tipping Weight67812 lb30759.1 kg
Turning Radius29.6 ft9004.5 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage100 amps100 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size35/65-33 (30PR) L-435/65-33 (30PR) L-4
Transmission
Transmission TypeClark 6421-11 countershaft type powershiftClark 6421-11 countershaft type powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward22.1 mph35.6 km/h
Max Speed - Reverse13 mph21 km/h
Hydraulic System
Relief Valve Setting2900 psi19994.8 kPa
Pump Flow Capacity194 gal/min734.4 L/min
Raise Time9 sec9 sec
Dump Time2.1 sec2.1 sec
Lower Time5.4 sec5.4 sec
Pump Typethree gear typethree gear type
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.