- Dump Clearance At Max Raise: 10 ft / 3045 mm
- Bucket Capacity - Heaped: 8.51 yd3 / 6.5 m3
- Bucket Capacity - Struck: 4.06 yd3 / 3.1 m3
- Bucket Width: 10.5 ft / 3200 mm
Published dimensions and weight
Michigan L150
The Michigan L150 is a wheel loader of about 21.3 t; its TD 102 GC engine is rated at 231 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight46870.3 lb21260 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Michigan L150 include published bucket capacity of 8.51 yd3 / 6.5 m3, published breakout force of 37320 lb / 166 kN, published operating weight of 46870.3 lb / 21260 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (10 ft / 3045 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (8.51 yd3 / 6.5 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (4.06 yd3 / 3.1 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise10 ft3045 mm
Bucket Capacity - Heaped8.51 yd36.5 m3
Bucket Capacity - Struck4.06 yd33.1 m3
Bucket Width10.5 ft3200 mm
Breakout Force37320 lb166 kN
Dimensions
Ground Clearance1.58 ft481 mm
Length With Bucket On Ground26.96 ft8215 mm
Width Over Tires9.73 ft2964 mm
Height To Top Of Cab11.98 ft3649 mm
Wheelbase11.65 ft3550 mm
Hinge Pin - Max Height14.28 ft4351 mm
Reach At Max Lift And Dump3.99 ft1215 mm
Engine
Number Of Cylinders66
Engine Make22442244
Engine ModelTD 102 GCTD 102 GC
Net Power231 hp172.3 kw
Gross Power245 hp182.7 kw
Power Measured @2100 rpm2100 rpm
Max Torque737.6 lb ft1000 Nm
Displacement585.9 cu in9.6 L
Torque Measured @1200 rpm1200 rpm
Aspirationturbochargedturbocharged
Operational
Operating Weight46870.3 lb21260 kg
Fuel Capacity89.6 gal339 L
Hydraulic System Fluid Capacity64.8 gal245 L
Engine Oil Fluid Capacity7.7 gal29 L
Cooling System Fluid Capacity17.2 gal65 L
Transmission Fluid Capacity11.9 gal45 L
Front Axle/Diff Fluid Capacity12.2 gal46 L
Rear Axle/Diff Fluid Capacity12.2 gal46 L
Static Tipping Weight32760 lb14859.7 kg
Turning Radius24.3 ft7392.5 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage60 amps60 amps
Rear Axle Oscillation15 degrees15 degrees
Tire Size26.5-R2526.5-R25
Transmission
Transmission TypeVolvo BM HT 210 power shiftVolvo BM HT 210 power shift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward21.1 mph34 km/h
Max Speed - Reverse14.5 mph23.4 km/h
Hydraulic System
Relief Valve Setting3046 psi21001.5 kPa
Pump Flow Capacity82.8 gal/min313.5 L/min
Raise Time6.7 sec6.7 sec
Dump Time1.9 sec1.9 sec
Lower Time3.2 sec3.2 sec
Pump Typevane pumpvane pump
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.