- Dump Clearance At Max Raise: 10.5 ft / 3200 mm
- Bucket Capacity - Heaped: 5.76 yd3 / 4.41 m3
- Bucket Capacity - Struck: 4.84 yd3 / 3.7 m3
- Bucket Width: 10.84 ft / 3302 mm
Published dimensions and weight
Michigan L190B
The Michigan L190B is a wheel loader of about 27.6 t, built around the NTA 855C335 engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight60910 lb27628.4 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Michigan L190B include published bucket capacity of 5.76 yd3 / 4.41 m3, published breakout force of 60203.83 lb / 267.8 kN, published operating weight of 60910 lb / 27628.4 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (10.5 ft / 3200 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (5.76 yd3 / 4.41 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (4.84 yd3 / 3.7 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise10.5 ft3200 mm
Bucket Capacity - Heaped5.76 yd34.41 m3
Bucket Capacity - Struck4.84 yd33.7 m3
Bucket Width10.84 ft3302 mm
Breakout Force60203.83 lb267.8 kN
Dimensions
Ground Clearance1.92 ft584 mm
Length With Bucket On Ground29.92 ft9119 mm
Width Over Tires10.25 ft3124 mm
Height To Top Of Cab12.34 ft3759 mm
Wheelbase11.5 ft3505 mm
Hinge Pin - Max Height14.63 ft4458 mm
Reach At Max Lift And Dump4.59 ft1397 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelNTA 855C335NTA 855C335
Net Power290 hp216.3 kw
Gross Power322 hp240.2 kw
Power Measured @1900 rpm1900 rpm
Max Torque1006 lb ft1364 Nm
Displacement855 cu in14.1 L
Torque Measured @1400 rpm1400 rpm
Aspirationturbo + aftercooledturbo + aftercooled
Operational
Operating Weight60910 lb27628.4 kg
Fuel Capacity115.2 gal436 L
Hydraulic System Fluid Capacity84.1 gal318 L
Engine Oil Fluid Capacity9.1 gal34.1 L
Cooling System Fluid Capacity21.1 gal79.8 L
Transmission Fluid Capacity24.1 gal91.2 L
Front Axle/Diff Fluid Capacity9.1 gal34.1 L
Rear Axle/Diff Fluid Capacity9.1 gal34.1 L
Static Tipping Weight45108 lb20460.7 kg
Turning Radius25.2 ft7658 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage100 amps100 amps
Rear Axle Oscillation22 degrees22 degrees
Tire Size29.5-25 (22PR) L-329.5-25 (22PR) L-3
Transmission
Transmission TypeClark 4425-202 countershaft type powershiftClark 4425-202 countershaft type powershift
Number Of Forward Gears44
Number Of Reverse Gears44
Max Speed - Forward22.2 mph35.7 km/h
Max Speed - Reverse22.2 mph35.7 km/h
Hydraulic System
Relief Valve Setting2950 psi20339.6 kPa
Pump Flow Capacity70 gal/min265 L/min
Raise Time6.9 sec6.9 sec
Dump Time3 sec3 sec
Lower Time4.6 sec4.6 sec
Pump Typegear typegear type
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.