- Dump Clearance At Max Raise: 9.8 ft / 2985 mm
- Bucket Capacity - Heaped: 4.01 yd3 / 3.06 m3
- Bucket Capacity - Struck: 3.41 yd3 / 2.6 m3
- Bucket Width: 10.34 ft / 3150 mm
Published dimensions and weight
Michigan L140
The Michigan L140 is a wheel loader of about 19.2 t, powered by a 203 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight42220 lb19150.7 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Michigan L140 include published bucket capacity of 4.01 yd3 / 3.06 m3, published breakout force of 43100 lb / 191.7 kN, published operating weight of 42220 lb / 19150.7 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.8 ft / 2985 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (4.01 yd3 / 3.06 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (3.41 yd3 / 2.6 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.8 ft2985 mm
Bucket Capacity - Heaped4.01 yd33.06 m3
Bucket Capacity - Struck3.41 yd32.6 m3
Bucket Width10.34 ft3150 mm
Breakout Force43100 lb191.7 kN
Dimensions
Ground Clearance1.42 ft432 mm
Length With Bucket On Ground27.17 ft8280 mm
Width Over Tires9.42 ft2870 mm
Height To Top Of Cab11.59 ft3531 mm
Wheelbase10.67 ft3251 mm
Hinge Pin - Max Height13.26 ft4039 mm
Reach At Max Lift And Dump3.42 ft1041 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelLT-10-225 HTLT-10-225 HT
Net Power203 hp151.4 kw
Gross Power225 hp167.8 kw
Power Measured @2000 rpm2000 rpm
Max Torque750 lb ft1016.9 Nm
Displacement611 cu in10.1 L
Torque Measured @1300 rpm1300 rpm
Aspirationturbocharged & aftercooledturbocharged & aftercooled
Operational
Operating Weight42220 lb19150.7 kg
Fuel Capacity90.9 gal344 L
Hydraulic System Fluid Capacity87 gal329 L
Engine Oil Fluid Capacity9.1 gal34.1 L
Cooling System Fluid Capacity15.1 gal56.8 L
Transmission Fluid Capacity10.6 gal39.8 L
Front Axle/Diff Fluid Capacity8.6 gal32.2 L
Rear Axle/Diff Fluid Capacity8.6 gal32.2 L
Static Tipping Weight33060.6 lb14996 kg
Turning Radius24.5 ft7442 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage100 amps100 amps
Rear Axle Oscillation18.5 degrees18.5 degrees
Tire Size23.5-25 (16PR) L-323.5-25 (16PR) L-3
Transmission
Transmission TypeClark R32425-6Clark R32425-6
Number Of Forward Gears44
Number Of Reverse Gears44
Max Speed - Forward19.9 mph32.1 km/h
Max Speed - Reverse19.9 mph32.1 km/h
Hydraulic System
Relief Valve Setting2750 psi18960.6 kPa
Pump Flow Capacity31 gal/min117.4 L/min
Raise Time7.5 sec7.5 sec
Dump Time1.5 sec1.5 sec
Lower Time2 sec2 sec
Pump Typegear typegear type
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.