- Dump Clearance At Max Raise: 12.26 ft / 3734 mm
- Bucket Capacity - Heaped: 7 yd3 / 5.35 m3
- Bucket Capacity - Struck: 5.89 yd3 / 4.5 m3
- Bucket Width: 12.34 ft / 3759 mm
Published dimensions and weight
Michigan L270
The Michigan L270 pairs the KT-19-C engine (360 hp) with an operating weight near 41.3 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight91070 lb41308.7 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Michigan L270 include published bucket capacity of 7 yd3 / 5.35 m3, published breakout force of 80000 lb / 355.8 kN, published operating weight of 91070 lb / 41308.7 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (12.26 ft / 3734 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (7 yd3 / 5.35 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (5.89 yd3 / 4.5 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise12.26 ft3734 mm
Bucket Capacity - Heaped7 yd35.35 m3
Bucket Capacity - Struck5.89 yd34.5 m3
Bucket Width12.34 ft3759 mm
Breakout Force80000 lb355.8 kN
Dimensions
Ground Clearance1.84 ft559 mm
Length With Bucket On Ground33.59 ft10236 mm
Width Over Tires11.34 ft3454 mm
Height To Top Of Cab12.84 ft3912 mm
Wheelbase12.34 ft3759 mm
Hinge Pin - Max Height16.42 ft5004 mm
Reach At Max Lift And Dump5.59 ft1702 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelKT-19-CKT-19-C
Net Power360 hp268.5 kw
Gross Power400 hp298.3 kw
Power Measured @2100 rpm2100 rpm
Max Torque1349.8 lb ft1830 Nm
Displacement1150 cu in18.9 L
Torque Measured @1500 rpm1500 rpm
Aspirationturbochargedturbocharged
Operational
Operating Weight91070 lb41308.7 kg
Fuel Capacity188 gal711.6 L
Hydraulic System Fluid Capacity120 gal454.2 L
Engine Oil Fluid Capacity11 gal41.6 L
Cooling System Fluid Capacity26 gal98.4 L
Transmission Fluid Capacity19.1 gal72 L
Front Axle/Diff Fluid Capacity16 gal60.5 L
Rear Axle/Diff Fluid Capacity16 gal60.5 L
Static Tipping Weight56680.9 lb25710 kg
Turning Radius28.1 ft8560 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage100 amps100 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size29.5-29 (28 PR) L-429.5-29 (28 PR) L-4
Transmission
Transmission TypeClark countershaft type powershift transmissionClark countershaft type powershift transmission
Number Of Forward Gears44
Number Of Reverse Gears44
Max Speed - Forward21.5 mph34.7 km/h
Max Speed - Reverse21.5 mph34.7 km/h
Hydraulic System
Relief Valve Setting2750 psi18960.6 kPa
Pump Flow Capacity179 gal/min677.6 L/min
Raise Time8.6 sec8.6 sec
Dump Time3 sec3 sec
Lower Time5 sec5 sec
Pump Typegear typegear type
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.