- Dump Clearance At Max Raise: 15.42 ft / 4699 mm
- Bucket Capacity - Heaped: 12.01 yd3 / 9.18 m3
- Bucket Capacity - Struck: 9.84 yd3 / 7.52 m3
- Bucket Width: 14.69 ft / 4475 mm
Published dimensions and weight
Clark Michigan 475C
The Clark Michigan 475C is a 76.1 t-class wheel loader with a 630.3 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight167763 lb76096 kg
03Selected published values46
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Clark Michigan 475C include published bucket capacity of 12.01 yd3 / 9.18 m3, published breakout force of 95633.72 lb / 425.4 kN, published operating weight of 167763 lb / 76096 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (15.42 ft / 4699 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (12.01 yd3 / 9.18 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (9.84 yd3 / 7.52 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise15.42 ft4699 mm
Bucket Capacity - Heaped12.01 yd39.18 m3
Bucket Capacity - Struck9.84 yd37.52 m3
Bucket Width14.69 ft4475 mm
Breakout Force95633.72 lb425.4 kN
Dimensions
Ground Clearance1.92 ft584 mm
Length With Bucket On Ground40.84 ft12446 mm
Width Over Tires13.51 ft4115 mm
Height To Top Of Cab16.01 ft4877 mm
Wheelbase15.17 ft4623 mm
Hinge Pin - Max Height20.59 ft6274 mm
Reach At Max Lift And Dump5.92 ft1803 mm
Engine
Number Of Cylinders1212
Engine Make23472347
Engine ModelVTA-1710CVTA-1710C
Net Power630.3 hp470 kw
Gross Power700.1 hp522 kw
Power Measured @2000 rpm2000 rpm
Max Torque2173.6 lb ft2947 Nm
Displacement1708.7 cu in28 L
Torque Measured @1500 rpm1500 rpm
Operational
Operating Weight167763 lb76096 kg
Fuel Capacity273 gal1033.4 L
Hydraulic System Fluid Capacity150 gal567.8 L
Engine Oil Fluid Capacity27 gal102.2 L
Cooling System Fluid Capacity60 gal227.1 L
Transmission Fluid Capacity33 gal124.9 L
Front Axle/Diff Fluid Capacity29.1 gal109.8 L
Rear Axle/Diff Fluid Capacity29.1 gal109.8 L
Static Tipping Weight101550 lb46062.4 kg
Turning Radius34.3 ft10439.5 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage100 amps100 amps
Rear Axle Oscillation20 degrees20 degrees
Tire Size41.25/70-39 34PR41.25/70-39 34PR
Transmission
Transmission TypeClark countershaft powershiftClark countershaft powershift
Number Of Forward Gears44
Number Of Reverse Gears44
Max Speed - Forward18.6 mph29.9 km/h
Max Speed - Reverse18.6 mph29.9 km/h
Hydraulic System
Relief Valve Setting2700 psi18615.9 kPa
Pump Flow Capacity230.9 gal/min874 L/min
Raise Time12 sec12 sec
Dump Time3.7 sec3.7 sec
Lower Time6.3 sec6.3 sec
Pump Typethree gear typethree gear type
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.