- Dump Clearance At Max Raise: 9.62 ft / 2930 mm
- Bucket Capacity - Heaped: 4.45 yd3 / 3.4 m3
- Bucket Capacity - Struck: 3.8 yd3 / 2.9 m3
- Bucket Width: 10 ft / 3048 mm
Published dimensions and weight
Clark Michigan 125C
The Clark Michigan 125C pairs the LT-10-225 HT engine (214.6 hp) with an operating weight near 19.7 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight43475.2 lb19720 kg
03Selected published values46
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Clark Michigan 125C include published bucket capacity of 4.45 yd3 / 3.4 m3, published breakout force of 39265.13 lb / 174.66 kN, published operating weight of 43475.2 lb / 19720 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.62 ft / 2930 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (4.45 yd3 / 3.4 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (3.8 yd3 / 2.9 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.62 ft2930 mm
Bucket Capacity - Heaped4.45 yd33.4 m3
Bucket Capacity - Struck3.8 yd32.9 m3
Bucket Width10 ft3048 mm
Breakout Force39265.13 lb174.66 kN
Dimensions
Ground Clearance1.19 ft360 mm
Length With Bucket On Ground27.37 ft8340 mm
Width Over Tires9.32 ft2840 mm
Height To Top Of Cab11.29 ft3440 mm
Wheelbase10.67 ft3251 mm
Hinge Pin - Max Height13.34 ft4065 mm
Reach At Max Lift And Dump3.55 ft1080 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelLT-10-225 HTLT-10-225 HT
Net Power214.6 hp160 kw
Gross Power226.7 hp169 kw
Power Measured @2000 rpm2000 rpm
Max Torque750.2 lb ft1017 Nm
Displacement611 cu in10.1 L
Torque Measured @1300 rpm1300 rpm
Operational
Operating Weight43475.2 lb19720 kg
Fuel Capacity75.1 gal284 L
Hydraulic System Fluid Capacity76.1 gal288 L
Engine Oil Fluid Capacity9 gal34 L
Cooling System Fluid Capacity15.1 gal57 L
Transmission Fluid Capacity10.6 gal40 L
Front Axle/Diff Fluid Capacity9.1 gal34.1 L
Rear Axle/Diff Fluid Capacity9.1 gal34.1 L
Static Tipping Weight32319.8 lb14660 kg
Turning Radius24.6 ft7475 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage100 amps100 amps
Rear Axle Oscillation18.5 degrees18.5 degrees
Tire Size23.5-2523.5-25
Transmission
Transmission TypeClark countershaft powershiftClark countershaft powershift
Number Of Forward Gears44
Number Of Reverse Gears44
Max Speed - Forward19.3 mph30.9 km/h
Max Speed - Reverse19.3 mph30.9 km/h
Hydraulic System
Relief Valve Setting2755.8 psi19000 kPa
Pump Flow Capacity90.5 gal/min342.5 L/min
Raise Time7.4 sec7.4 sec
Dump Time1.4 sec1.4 sec
Lower Time3.2 sec3.2 sec
Pump Typetandem gear typetandem gear type
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.