- Dump Clearance At Max Raise: 10.14 ft / 3089 mm
- Bucket Capacity - Heaped: 5.5 yd3 / 4.2 m3
- Bucket Capacity - Struck: 4.71 yd3 / 3.6 m3
- Bucket Width: 10.34 ft / 3150 mm
Published dimensions and weight
Clark Michigan 175C
The Clark Michigan 175C is a wheel loader of about 26.2 t; its NT-855C engine is rated at 288.4 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight57781 lb26209 kg
03Selected published values46
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Clark Michigan 175C include published bucket capacity of 5.5 yd3 / 4.2 m3, published breakout force of 38240 lb / 170.1 kN, published operating weight of 57781 lb / 26209 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (10.14 ft / 3089 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (5.5 yd3 / 4.2 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (4.71 yd3 / 3.6 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise10.14 ft3089 mm
Bucket Capacity - Heaped5.5 yd34.2 m3
Bucket Capacity - Struck4.71 yd33.6 m3
Bucket Width10.34 ft3150 mm
Breakout Force38240 lb170.1 kN
Dimensions
Ground Clearance1.76 ft536 mm
Length With Bucket On Ground28.58 ft8710 mm
Width Over Tires10.02 ft3053 mm
Height To Top Of Cab12.16 ft3706 mm
Wheelbase11.25 ft3429 mm
Hinge Pin - Max Height14.04 ft4277 mm
Reach At Max Lift And Dump4.29 ft1306 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelNT-855CNT-855C
Net Power288.4 hp215 kw
Gross Power309.8 hp231 kw
Power Measured @2100 rpm2100 rpm
Max Torque1006.1 lb ft1364 Nm
Displacement854.4 cu in14 L
Torque Measured @1500 rpm1500 rpm
Operational
Operating Weight57781 lb26209 kg
Fuel Capacity124.1 gal469.4 L
Hydraulic System Fluid Capacity103.1 gal389.9 L
Engine Oil Fluid Capacity9.1 gal34.1 L
Cooling System Fluid Capacity20 gal75.7 L
Transmission Fluid Capacity12.5 gal47.3 L
Front Axle/Diff Fluid Capacity9.1 gal34.1 L
Rear Axle/Diff Fluid Capacity9.1 gal34.1 L
Static Tipping Weight48567.9 lb22030 kg
Turning Radius24.7 ft7525 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage75 amps75 amps
Rear Axle Oscillation23 degrees23 degrees
Tire Size26.5-25 20PR26.5-25 20PR
Transmission
Transmission TypeClark countershaft type powershiftClark countershaft type powershift
Number Of Forward Gears44
Number Of Reverse Gears44
Max Speed - Forward20.4 mph32.8 km/h
Max Speed - Reverse20.4 mph32.8 km/h
Hydraulic System
Relief Valve Setting2600 psi17926.4 kPa
Pump Flow Capacity118.1 gal/min446.7 L/min
Raise Time6.7 sec6.7 sec
Dump Time2 sec2 sec
Lower Time4.2 sec4.2 sec
Pump Typetandem gear typetandem gear type
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.