- Dump Clearance At Max Raise: 8.73 ft / 2660 mm
- Bucket Capacity - Heaped: 1.31 yd3 / 1 m3
- Bucket Capacity - Struck: 1.12 yd3 / 0.85 m3
- Bucket Width: 6.96 ft / 2120 mm
Published dimensions and weight
Clark Michigan 35B
The Clark Michigan 35B is a wheel loader of about 6.5 t, built around the D500PL engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight14418.3 lb6540 kg
03Selected published values46
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Clark Michigan 35B include published bucket capacity of 1.31 yd3 / 1 m3, published breakout force of 10655.95 lb / 47.4 kN, published operating weight of 14418.3 lb / 6540 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.73 ft / 2660 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.31 yd3 / 1 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (1.12 yd3 / 0.85 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.73 ft2660 mm
Bucket Capacity - Heaped1.31 yd31 m3
Bucket Capacity - Struck1.12 yd30.85 m3
Bucket Width6.96 ft2120 mm
Breakout Force10655.95 lb47.4 kN
Dimensions
Ground Clearance1.17 ft355 mm
Length With Bucket On Ground18.02 ft5490 mm
Width Over Tires6.67 ft2030 mm
Height To Top Of Cab9.5 ft2895 mm
Wheelbase7.71 ft2350 mm
Hinge Pin - Max Height11.13 ft3390 mm
Reach At Max Lift And Dump3.29 ft1000 mm
Engine
Number Of Cylinders66
Engine Make23532353
Engine ModelD500PLD500PL
Net Power74 hp55.2 kw
Gross Power84 hp62.7 kw
Power Measured @2200 rpm2200 rpm
Max Torque194.8 lb ft264 Nm
Displacement303.8 cu in5 L
Torque Measured @1600 rpm1600 rpm
Operational
Operating Weight14418.3 lb6540 kg
Fuel Capacity25.1 gal95 L
Hydraulic System Fluid Capacity21.7 gal82 L
Engine Oil Fluid Capacity3.5 gal13 L
Cooling System Fluid Capacity7.2 gal27 L
Transmission Fluid Capacity4.5 gal17 L
Front Axle/Diff Fluid Capacity3.7 gal14 L
Rear Axle/Diff Fluid Capacity3.7 gal14 L
Static Tipping Weight9479.9 lb4300 kg
Turning Radius16.8 ft5100 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage25 amps25 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size12.00-24 8PR (L-2)12.00-24 8PR (L-2)
Transmission
Transmission Typecountershaft powershiftcountershaft powershift
Number Of Forward Gears33
Number Of Reverse Gears33
Max Speed - Forward21.2 mph34 km/h
Max Speed - Reverse21.5 mph34.5 km/h
Hydraulic System
Relief Valve Setting2275 psi15685.6 kPa
Pump Flow Capacity32.3 gal/min122 L/min
Raise Time6 sec6 sec
Dump Time1.1 sec1.1 sec
Lower Time3.4 sec3.4 sec
Pump Typegear typegear type
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.