- Dump Clearance At Max Raise: 12.75 ft / 3886 mm
- Bucket Capacity - Heaped: 7.46 yd3 / 5.7 m3
- Bucket Capacity - Struck: 6.15 yd3 / 4.7 m3
- Bucket Width: 11.84 ft / 3607 mm
Published dimensions and weight
Clark Michigan 275C
The Clark Michigan 275C pairs the KT 19 C engine (355.4 hp) with an operating weight near 40.2 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight88696.4 lb40232 kg
03Selected published values43
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Clark Michigan 275C include published bucket capacity of 7.46 yd3 / 5.7 m3, published breakout force of 244.6 kN, published operating weight of 88696.4 lb / 40232 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (12.75 ft / 3886 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (7.46 yd3 / 5.7 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (6.15 yd3 / 4.7 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise12.75 ft3886 mm
Bucket Capacity - Heaped7.46 yd35.7 m3
Bucket Capacity - Struck6.15 yd34.7 m3
Bucket Width11.84 ft3607 mm
Breakout Force_ -244.6 kN
Dimensions
Ground Clearance1.87 ft567 mm
Length With Bucket On Ground34.35 ft10467 mm
Width Over Tires11.5 ft3505 mm
Height To Top Of Cab12.82 ft3907 mm
Wheelbase12.17 ft3708 mm
Hinge Pin - Max Height16.8 ft5118 mm
Reach At Max Lift And Dump5.59 ft1702 mm
Engine
Engine Make23472347
Engine ModelKT 19 CKT 19 C
Net Power355.4 hp265 kw
Gross Power399.7 hp298 kw
Max Torque1349.8 lb ft1830 Nm
Displacement1153.4 cu in18.9 L
Operational
Operating Weight88696.4 lb40232 kg
Fuel Capacity165.1 gal624.6 L
Hydraulic System Fluid Capacity136 gal514.8 L
Engine Oil Fluid Capacity11 gal41.6 L
Cooling System Fluid Capacity26 gal98.4 L
Transmission Fluid Capacity19 gal71.9 L
Front Axle/Diff Fluid Capacity16 gal60.5 L
Rear Axle/Diff Fluid Capacity16 gal60.5 L
Static Tipping Weight58224.1 lb26410 kg
Turning Radius28.1 ft8535 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage100 amps100 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size29.5-2929.5-29
Transmission
Transmission TypeClark countershaft powershiftClark countershaft powershift
Number Of Forward Gears44
Number Of Reverse Gears44
Max Speed - Forward21.5 mph34.6 km/h
Max Speed - Reverse21.5 mph34.6 km/h
Hydraulic System
Relief Valve Setting2500 psi17236.9 kPa
Pump Flow Capacity117.2 gal/min443.4 L/min
Raise Time10 sec10 sec
Dump Time2.1 sec2.1 sec
Lower Time6 sec6 sec
Pump Typetandem gear typetandem gear type
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.