- Overall Length: 28 ft / 8534 mm
- Width Over Tires: 8.7 ft / 2650 mm
- Wheelbase: 20.41 ft / 6219 mm
- Rear Ground Clearance: 1.25 ft / 380 mm
Published dimensions and weight
Case 885B DHP
Rated at 219 hp, the Case 885B DHP is a motor grader.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total40466 lb18355.1 kg
03Selected published values65
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Case 885B DHP include published moldboard width of 14 ft / 4267.2 mm, published operating weight of 40466 lb / 18355.1 kg, published engine power of 219 hp / 163.4 kw. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (28 ft / 8534 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.7 ft / 2650 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.41 ft / 6219 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length28 ft8534 mm
Width Over Tires8.7 ft2650 mm
Wheelbase20.41 ft6219 mm
Rear Ground Clearance1.25 ft380 mm
Tandem Axle Wheelbase5.33 ft1624 mm
Front Ground Clearance2.05 ft622 mm
Blade Base8.41 ft2562 mm
Overall Height With Cab10.31 ft3140 mm
Front Axle Clearance22.84 in580 mm
Height To Top Of Isomount Cab10.96 ft3340 mm
Bank Angle9090
Engine
FuelDieseDiese
Fuel InjectionCommon RailCommon Rail
Emission Tier LevelTier 3Tier 3
Number Of Cylinders66
Engine Make22392239
Engine ModelFPT 6.7LFPT 6.7L
Engine Type4-stroke, turbocharged and air-to-air after cooled4-stroke, turbocharged and air-to-air after cooled
Net Power219 hp163.4 kw
Power Measured @2200 rpm2200 rpm
Net Power Gears 7-8214 hp159.6 kw
Net Torque Gears 7-8726 lb ft984.4 Nm
Displacement408.9 cu in6.7 L
Bore4.1 in104 mm
Stroke5.2 in132 mm
AspirationTurbocharged with AftercoolerTurbocharged with Aftercooler
Operational
Std Operation Weight - Front Axle12496 lb5668.1 kg
Std Operation Weight - Rear Axle27970 lb12687 kg
Hydraulic System Fluid Capacity47.5 gal179.9 L
Std Operation Weight - Total40466 lb18355.1 kg
Oil System Fluid Capacity4.4 gal16.7 L
Fuel Capacity90 gal340.7 L
Cooling System Fluid Capacity10.5 gal39.8 L
Transmission Fluid Capacity5.8 gal22 L
Rear Diff/Final Drive Fluid Capacity10.5 gal39.8 L
Circle Gearbox Fluid Capacity0.8 gal2.8 L
Tandem Case Fluid Capacity (Each)15.9 gal60.2 L
Tire Size20.5-2520.5-25
Operating Voltage24 V24 V
Alternator Supplied Amperage90 amps90 amps
Steering
Articulation Angle25 degrees25 degrees
Turning Radius24 ft7.3 m
Transmission
Transmission Typepowershiftpowershift
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward26.7 mph43 km/h
Max Speed - Reverse19 mph30.6 km/h
Speed Range66
Front Axle
Wheel Lean20 degrees20 degrees
Oscillation - Total15.3 degrees15.3 degrees
Ground Clearance2.1 ft622 mm
Moldboard
Moldboard Width14 ft4267.2 mm
Moldboard Height23.7 in600 mm
Moldboard Thickness0.9 in22.2 mm
Max Depth Of Cut28 in711.2 mm
Side Shift Left21 in533.4 mm
Side Shift Right27 in685.8 mm
Blade Down Pressure21178 lb9606.2 kg
Hydraulic System
Pump TypeClosed center, load sensingClosed center, load sensing
Pump Flow49 gal/min185.5 L/min
Circle
Blade Pitch Operation Adjustment Fwd42 degrees42 degrees
Blade Pitch Operation Adjustment Rear87 degrees87 degrees
Diameter69 in1752.6 mm
Rotation360 degrees360 degrees
Max Lift Above Ground17.5 in444.5 mm
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.