- Overall Length: 28 ft / 8534 mm
- Width Over Tires: 8.25 ft / 2510 mm
- Wheelbase: 20.43 ft / 6219 mm
- Rear Ground Clearance: 1.25 ft / 380 mm
Published dimensions and weight
Case 845 DHP
Rated at 160 hp, the Case 845 DHP is a motor grader.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total29777 lb13535 kg
03Selected published values52
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Case 845 DHP include published moldboard width of 12 ft / 3658 mm, published maximum power of 160 hp / 119.4 kw, published operating weight of 29777 lb / 13535 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (28 ft / 8534 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.25 ft / 2510 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.43 ft / 6219 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length28 ft8534 mm
Width Over Tires8.25 ft2510 mm
Wheelbase20.43 ft6219 mm
Rear Ground Clearance1.25 ft380 mm
Tandem Axle Wheelbase5.17 ft1594 mm
Front Ground Clearance2.04 ft622 mm
Blade Base8.42 ft2562 mm
Height To Top Of Isomount Cab10.92 ft3340 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelQSB 6.7, Tier III certified electronic controlledQSB 6.7, Tier III certified electronic controlled
Power Measured @2200 rpm2200 rpm
Torque Measured @1500 rpm1500 rpm
Max Power160 hp119.4 kw
Net Power Gears 7-8160 hp119 kw
Net Torque Gears 7-8550 lb ft746 Nm
Displacement411 cu in6.7 L
Aspirationturbocharged and air to air aftercooledturbocharged and air to air aftercooled
Operational
Std Operation Weight - Front Axle8155 lb3707 kg
Hydraulic System Fluid Capacity47.5 gal180 L
Std Operation Weight - Rear Axle21621 lb9828 kg
Std Operation Weight - Total29777 lb13535 kg
Oil System Fluid Capacity4.3 gal16.3 L
Fuel Capacity90 gal340.7 L
Cooling System Fluid Capacity10.5 gal40 L
Transmission Fluid Capacity6.6 gal25 L
Rear Diff/Final Drive Fluid Capacity3.2 gal12 L
Circle Gearbox Fluid Capacity0.8 gal2.8 L
Tandem Case Fluid Capacity (Each)7.6 gal28.7 L
Tire Size14.0 x 24 12PR TL G2 Firestone14.0 x 24 12PR TL G2 Firestone
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Steering
Articulation Angle25 degrees25 degrees
Turning Radius23.8 ft7.3 m
Transmission
Transmission TypeDirect drive countershaft powershift w/ electronic shift control and inching pedalDirect drive countershaft powershift w/ electronic shift control and inching pedal
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward26.6 mph42.9 km/h
Max Speed - Reverse17.7 mph28.5 km/h
Front Axle
Wheel Lean17.5 degrees17.5 degrees
Oscillation - Total19 degrees19 degrees
Moldboard
Moldboard Width12 ft3658 mm
Moldboard Height22 in559 mm
Moldboard Thickness0.9 in22.2 mm
Max Depth Of Cut28 in711.2 mm
Side Shift Left21 in533 mm
Side Shift Right27 in686 mm
Hydraulic System
Pump TypeClosed center, load sensing, gear pump.Closed center, load sensing, gear pump.
Pump Flow50.5 gal/min191.5 L/min
Circle
Diameter69 in1752.6 mm
Rotation360 degrees360 degrees
Max Lift Above Ground17.5 in444.5 mm
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.