- Overall Length: 28 ft / 8534 mm
- Width Over Tires: 8.05 ft / 2452 mm
- Wheelbase: 20.41 ft / 6219 mm
- Rear Ground Clearance: 1.25 ft / 380 mm
Published dimensions and weight
Case 865B VHP
Rated at 220 hp, the Case 865B VHP is a motor grader.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total35993 lb16326.2 kg
03Selected published values58
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Case 865B VHP include published moldboard width of 14 ft / 4267.2 mm, published operating weight of 35993 lb / 16326.2 kg, published engine power of 220 hp / 164.1 kw. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (28 ft / 8534 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.05 ft / 2452 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.41 ft / 6219 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length28 ft8534 mm
Width Over Tires8.05 ft2452 mm
Wheelbase20.41 ft6219 mm
Rear Ground Clearance1.25 ft380 mm
Tandem Axle Wheelbase5.23 ft1594 mm
Front Ground Clearance2.05 ft622 mm
Blade Base8.41 ft2562 mm
Overall Height With Cab10.34 ft3150 mm
Height To Top Of Isomount Cab10.96 ft3340 mm
Bank Angle9090
Engine
Emissions CertificationTier 3Tier 3
Number Of Cylinders66
Engine ModelFPT F4HE9687CFPT F4HE9687C
Gross Power220 hp164.1 kw
Power Measured @2200 rpm2200 rpm
Peak Torque169.7 lb ft230 Nm
Torque Measured @1500 rpm1500 rpm
Net Power Gears 7-8205 hp152.9 kw
Net Torque Gears 7-8686 lb ft930.1 Nm
Displacement409 cu in6.8 L
AspirationTurbocharged with air to air coolerTurbocharged with air to air cooler
Operational
Std Operation Weight - Front Axle12129 lb5501.7 kg
Std Operation Weight - Rear Axle23864 lb10824.6 kg
Hydraulic System Fluid Capacity50.2 gal190.1 L
Std Operation Weight - Total35993 lb16326.2 kg
Oil System Fluid Capacity18.5 gal70.1 L
Fuel Capacity90 gal340.7 L
Cooling System Fluid Capacity10.5 gal39.8 L
Transmission Fluid Capacity25 gal94.7 L
Rear Diff/Final Drive Fluid Capacity11.6 gal44 L
Circle Gearbox Fluid Capacity0.8 gal2.8 L
Tandem Case Fluid Capacity (Each)15.9 gal60.2 L
Tire Size17.5-2517.5-25
Operating Voltage24 V24 V
Alternator Supplied Amperage90 amps90 amps
Steering
Articulation Angle25 degrees25 degrees
Turning Radius23.8 ft7.3 m
Transmission
Transmission TypePowershiftPowershift
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward26.6 mph42.9 km/h
Max Speed - Reverse17.7 mph28.5 km/h
Speed Range88
Front Axle
Wheel Lean20 degrees20 degrees
Oscillation - Total15.3 degrees15.3 degrees
Moldboard
Moldboard Width14 ft4267.2 mm
Moldboard Height23.7 in600 mm
Moldboard Thickness0.9 in22 mm
Max Depth Of Cut28 in711.2 mm
Side Shift Left21 in533.4 mm
Side Shift Right27 in685.8 mm
Blade Down Pressure20626 lb9355.8 kg
Hydraulic System
Pump Typeload sensing pistonload sensing piston
Pump Flow49 gal/min185.5 L/min
Circle
Blade Lift Above Ground17.6 in445 mm
Diameter69 in1752.6 mm
Rotation360 degrees360 degrees
Max Lift Above Ground17.5 in444.5 mm
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.