- Overall Length: 28 ft / 8534 mm
- Width Over Tires: 8.24 ft / 2510 mm
- Wheelbase: 20.41 ft / 6219 mm
- Rear Ground Clearance: 1.25 ft / 380 mm
Published dimensions and weight
Case 865 DHP
Rated at 200 hp, the Case 865 DHP is a motor grader.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total32077 lb14549.9 kg
03Selected published values54
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Case 865 DHP include published moldboard width of 13 ft / 3962 mm, published maximum power of 200 hp / 149.2 kw, published operating weight of 32077 lb / 14549.9 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (28 ft / 8534 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.24 ft / 2510 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.41 ft / 6219 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length28 ft8534 mm
Width Over Tires8.24 ft2510 mm
Wheelbase20.41 ft6219 mm
Rear Ground Clearance1.25 ft380 mm
Tandem Axle Wheelbase5.23 ft1594 mm
Front Ground Clearance2.05 ft622 mm
Blade Base8.41 ft2562 mm
Height To Top Of Isomount Cab10.96 ft3340 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelQSB-5.9QSB-5.9
Power Measured @2200 rpm2200 rpm
Torque Measured @1500 rpm1500 rpm
Max Power200 hp149.2 kw
Net Power Gears 7-8200 hp149.2 kw
Net Torque Gears 7-8601 lb ft814.9 Nm
Displacement360 cu in5.9 L
Aspirationturbocharged and air to air cooledturbocharged and air to air cooled
Operational
Std Operation Weight - Front Axle9370 lb4250.2 kg
Std Operation Weight - Rear Axle22707 lb10299.8 kg
Hydraulic System Fluid Capacity47.6 gal180 L
Std Operation Weight - Total32077 lb14549.9 kg
Oil System Fluid Capacity5.6 gal21.1 L
Fuel Capacity90.1 gal341 L
Cooling System Fluid Capacity10.6 gal40 L
Transmission Fluid Capacity7.2 gal27 L
Rear Diff/Final Drive Fluid Capacity3.2 gal12 L
Circle Gearbox Fluid Capacity0.8 gal2.8 L
Tandem Case Fluid Capacity (Each)7.6 gal28.7 L
Tire Size14.0x24 12PR TL G2 Firestone14.0x24 12PR TL G2 Firestone
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Steering
Articulation Angle25 degrees25 degrees
Turning Radius23.8 ft7.3 m
Transmission
Transmission TypePower ShiftPower Shift
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward26.6 mph42.9 km/h
Max Speed - Reverse17.7 mph28.5 km/h
Front Axle
Wheel Lean17.5 degrees17.5 degrees
Oscillation - Total19 degrees19 degrees
Ground Clearance2.1 ft622 mm
Moldboard
Moldboard Width13 ft3962 mm
Moldboard Height23.7 in600 mm
Moldboard Thickness0.9 in22.2 mm
Max Depth Of Cut28 in711.2 mm
Side Shift Left21 in533 mm
Side Shift Right27.1 in686 mm
Blade Down Pressure16768.4 lb7606 kg
Hydraulic System
Pump Typeload sensing piston pumpload sensing piston pump
Pump Flow49 gal/min185.5 L/min
Circle
Diameter69 in1752 mm
Rotation360 degrees360 degrees
Max Lift Above Ground17.5 in444.5 mm
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.