- Overall Length: 28 ft / 8534.4 mm
- Width Over Tires: 8.2 ft / 2499 mm
- Wheelbase: 20.41 ft / 6219 mm
- Rear Ground Clearance: 1.25 ft / 380 mm
Published dimensions and weight
Case 845B DHP
Rated at 160 hp, the Case 845B DHP is a motor grader.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total32199 lb14605.3 kg
03Selected published values52
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Case 845B DHP include published moldboard width of 12 ft / 3657.6 mm, published operating weight of 32199 lb / 14605.3 kg, the published “Overall Length” field of 28 ft / 8534.4 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (28 ft / 8534.4 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.2 ft / 2499 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.41 ft / 6219 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length28 ft8534.4 mm
Width Over Tires8.2 ft2499 mm
Wheelbase20.41 ft6219 mm
Rear Ground Clearance1.25 ft380 mm
Tandem Axle Wheelbase5.16 ft1572 mm
Front Ground Clearance2.05 ft622 mm
Blade Base8.41 ft2562 mm
Height To Top Of Isomount Cab10.96 ft3340 mm
Engine
Number Of Cylinders66
Engine Make22392239
Engine ModelFPT 6.7LFPT 6.7L
Power Measured @2200 rpm2200 rpm
Torque Measured @1500 rpm1500 rpm
Net Power Gears 7-8160 hp119.4 kw
Net Torque Gears 7-8560 lb ft759.3 Nm
Displacement409 cu in6.8 L
AspirationTurbocharged with air to air aftercoolerTurbocharged with air to air aftercooler
Operational
Std Operation Weight - Front Axle9912 lb4496.1 kg
Std Operation Weight - Rear Axle22287 lb10109.3 kg
Hydraulic System Fluid Capacity47.5 gal179.9 L
Std Operation Weight - Total32199 lb14605.3 kg
Oil System Fluid Capacity18.5 gal70.1 L
Fuel Capacity90 gal340.7 L
Cooling System Fluid Capacity10.5 gal39.8 L
Transmission Fluid Capacity21 gal79.5 L
Rear Diff/Final Drive Fluid Capacity10.5 gal39.8 L
Circle Gearbox Fluid Capacity0.8 gal2.8 L
Tandem Case Fluid Capacity (Each)15.9 gal60.2 L
Tire Size14.0 x 24-10 PR14.0 x 24-10 PR
Operating Voltage24 V24 V
Alternator Supplied Amperage90 amps90 amps
Steering
Articulation Angle25 degrees25 degrees
Turning Radius23.8 ft7.3 m
Transmission
Transmission Typedirect drive powershiftdirect drive powershift
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward26.6 mph42.9 km/h
Max Speed - Reverse17.7 mph28.5 km/h
Front Axle
Wheel Lean20 degrees20 degrees
Oscillation - Total15.3 degrees15.3 degrees
Moldboard
Moldboard Width12 ft3657.6 mm
Moldboard Height22 in558.8 mm
Moldboard Thickness0.9 in22 mm
Max Depth Of Cut28 in711.2 mm
Side Shift Left21 in533.4 mm
Side Shift Right27 in685.8 mm
Blade Down Pressure16854 lb7644.9 kg
Hydraulic System
Pump Typeload sensing pistonload sensing piston
Pump Flow49 gal/min185.5 L/min
Circle
Diameter69 in1752.6 mm
Rotation360 degrees360 degrees
Max Lift Above Ground17.5 in444.5 mm
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.