- Length W/ Bucket On Ground: 27.96 ft / 8520 mm
- Width Over Tires: 8.87 ft / 2702 mm
- Height To Top Of Cab: 11.06 ft / 3370 mm
- Wheelbase: 10.83 ft / 3300 m
Published dimensions and weight
JCB 456HT
Weighing roughly 20.1 t and rated at 207 hp, the JCB 456HT is an integrated tool carrier in its size class.
01Published dimensions and weight
Dimensions reference
Representative category illustration; exact model may differ.Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight44407.8 lb20143 kg
03Selected published values50
Integrated tool carriers are commonly used for loading and material handling with interchangeable front attachments. Published rows for JCB 456HT include published bucket capacity of 4.4 yd3 / 3.3 m3, published breakout force of 33721.4 lb / 150 kN, published operating weight of 44407.8 lb / 20143 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Length W/ Bucket On Ground” field (27.96 ft / 8520 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.87 ft / 2702 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Height To Top Of Cab” field (11.06 ft / 3370 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Length W/ Bucket On Ground27.96 ft8520 mm
Width Over Tires8.87 ft2702 mm
Height To Top Of Cab11.06 ft3370 mm
Wheelbase10.83 ft3300 m
Ground Clearance1.55 ft470 mm
Hinge Pin Max Height14.13 ft4304 mm
Dump Clearance At Max Lift10.07 ft3069 mm
Max Lift Height13.76 ft4194 mm
Fork Tine Length4.01 ft1220 mm
BucketGPGP
Reach At Max Height And Dump4.01 ft1220 mm
Engine
Number Of Cylinders66
Engine Make00
Engine ModelQSC 8.3QSC 8.3
Gross Power215 hp160.4 kw
Net Power207 hp154.4 kw
Power Measured @2200 rpm2200 rpm
Max Torque675 lb ft915.2 Nm
Torque Measured @1500 rpm1500 rpm
Displacement506.5 cu in8.3 L
Aspirationturbochargedturbocharged
Operational
Operating Weight44407.8 lb20143 kg
Fuel Capacity84.6 gal320 L
Cooling System Fluid Capacity10.6 gal40 L
Engine Oil Capacity5 gal18.9 L
Transmission Fluid Capacity9 gal34 L
Front Diff Fluid Capacity18.3 gal69 L
Rear Diff Fluid Capacity13.5 gal51 L
Hydraulic System Fluid Capacity56.8 gal215 L
Turning Radius21.8 ft6630 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation25 degrees25 degrees
Static Tipping Load - Bucket31951.6 lb14493 kg
Static Tipping Load - Forks24870.4 lb11281 kg
Tire SizeMichelin 23.5R25 XHA L3Michelin 23.5R25 XHA L3
Transmission
Transmission Typesmooth shift powershiftsmooth shift powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed Forward23.3 mph37.4 km/h
Max Speed Reverse15.2 mph24.4 km/h
Hydraulic System
Pump Typetwin variable displacement piston pumptwin variable displacement piston pump
Relief Valve Setting3625 psi24993.5 kPa
Pump Flow Capacity86.2 gal/min326 L/min
Raise Time5.8 sec5.8 sec
Dump Time1.2 sec1.2 sec
Lower Time4.1 sec4.1 sec
Bucket
Breakout Force33721.4 lb150 kN
Bucket Capacity - Heaped4.4 yd33.3 m3
Bucket Capacity - Struck3.5 yd32.7 m3
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.