- Length W/ Bucket On Ground: 16.41 ft / 5000 mm
- Height To Top Of Cab: 8.54 ft / 2600 mm
- Wheelbase: 6.57 ft / 2000 m
- Ground Clearance: 1.22 ft / 370 mm
Published dimensions and weight
JCB 407ZX
The JCB 407ZX is an integrated tool carrier of about 4.7 t, built around the 1104C-44 engine.
01Published dimensions and weight
Dimensions reference
Representative category illustration; exact model may differ.Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight10381 lb4708.8 kg
03Selected published values46
Integrated tool carriers are commonly used for loading and material handling with interchangeable front attachments. Published rows for JCB 407ZX include published bucket capacity of 0.9 yd3 / 0.7 m3, published breakout force of 10363.7 lb / 46.1 kN, published operating weight of 10381 lb / 4708.8 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Length W/ Bucket On Ground” field (16.41 ft / 5000 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Height To Top Of Cab” field (8.54 ft / 2600 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (6.57 ft / 2000 m) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Length W/ Bucket On Ground16.41 ft5000 mm
Height To Top Of Cab8.54 ft2600 mm
Wheelbase6.57 ft2000 m
Ground Clearance1.22 ft370 mm
Hinge Pin Max Height10.17 ft3099 mm
Dump Clearance At Max Lift10.17 ft3099 mm
Max Lift Height9.78 ft2978 mm
Fork Tine Length3.94 ft1200 mm
Reach At Max Height And Dump2.18 ft662 mm
Engine
Number Of Cylinders44
Engine Make22572257
Engine Model1104C-441104C-44
Gross Power75 hp56 kw
Net Power67 hp50 kw
Power Measured @2000 rpm2000 rpm
Max Torque223 lb ft302.4 Nm
Torque Measured @1400 rpm1400 rpm
Displacement268.5 cu in4.4 L
AspirationNatural aspiratedNatural aspirated
Operational
Operating Weight10381 lb4708.8 kg
Fuel Capacity26.5 gal100.4 L
Cooling System Fluid Capacity4 gal15.2 L
Engine Oil Capacity2.5 gal9.5 L
Front Diff Fluid Capacity2.5 gal9.5 L
Rear Diff Fluid Capacity2.8 gal10.6 L
Hydraulic System Fluid Capacity22.5 gal85.2 L
Turning Radius11.8 ft3590 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage75 amps75 amps
Rear Axle Oscillation9 degrees9 degrees
Static Tipping Load - Bucket6810 lb3089 kg
Tire Size12.5 x 1812.5 x 18
Transmission
Transmission TypeHydrostaticHydrostatic
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed Forward12.5 mph20.1 km/h
Max Speed Reverse12.5 mph20.1 km/h
Hydraulic System
Pump TypeGearGear
Relief Valve Setting3191 psi22001.2 kPa
Pump Flow Capacity3.9 gal/min14.6 L/min
Raise Time5 sec4.95 sec
Dump Time1 sec0.95 sec
Lower Time3.2 sec3.2 sec
Bucket
Breakout Force10363.7 lb46.1 kN
Bucket Capacity - Heaped0.9 yd30.7 m3
Bucket Capacity - Struck0.7 yd30.6 m3
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.