- Length W/ Bucket On Ground: 16.64 ft / 5070 mm
- Height To Top Of Cab: 8.73 ft / 2660 mm
- Wheelbase: 6.57 ft / 2000 m
- Ground Clearance: 1.35 ft / 410 mm
Published dimensions and weight
JCB 409ZX
The JCB 409ZX is an integrated tool carrier of about 5.2 t; its 1104C-44 engine is rated at 67 hp.
01Published dimensions and weight
Dimensions reference
Representative category illustration; exact model may differ.Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight11571 lb5248.6 kg
03Selected published values48
Integrated tool carriers are commonly used for loading and material handling with interchangeable front attachments. Published rows for JCB 409ZX include published bucket capacity of 1.2 yd3 / 1 m3, published breakout force of 10836 lb / 48.3 kN, published operating weight of 11571 lb / 5248.6 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Length W/ Bucket On Ground” field (16.64 ft / 5070 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Height To Top Of Cab” field (8.73 ft / 2660 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (6.57 ft / 2000 m) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Length W/ Bucket On Ground16.64 ft5070 mm
Height To Top Of Cab8.73 ft2660 mm
Wheelbase6.57 ft2000 m
Ground Clearance1.35 ft410 mm
Hinge Pin Max Height10.39 ft3165 mm
Dump Clearance At Max Lift8.25 ft2512 mm
Max Lift Height9.99 ft3044 mm
Fork Tine Length3.94 ft1200 mm
Bucket16.4216.42
Reach At Max Height And Dump2.09 ft634 mm
Engine
Number Of Cylinders44
Engine Make22572257
Engine Model1104C-441104C-44
Gross Power75 hp56 kw
Net Power67 hp50 kw
Power Measured @2000 rpm2000 rpm
Max Torque223 lb ft302.4 Nm
Torque Measured @1400 rpm1400 rpm
Displacement268.5 cu in4.4 L
AspirationNatural aspiratedNatural aspirated
Operational
Operating Weight11571 lb5248.6 kg
Fuel Capacity26.5 gal100 L
Cooling System Fluid Capacity4.1 gal15.5 L
Engine Oil Capacity2.5 gal9.4 L
Front Diff Fluid Capacity2.6 gal9.5 L
Rear Diff Fluid Capacity2.8 gal10.5 L
Hydraulic System Fluid Capacity22.5 gal85 L
Turning Radius12.1 ft3670 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage75 amps75 amps
Rear Axle Oscillation9 degrees9 degrees
Static Tipping Load - Bucket9191 lb4169 kg
Static Tipping Load - Forks6710.9 lb3044 kg
Tire Size14.5x2014.5x20
Transmission
Transmission TypeHydrostaticHydrostatic
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed Forward12.5 mph20.1 km/h
Max Speed Reverse12.5 mph20.1 km/h
Hydraulic System
Pump TypeGearGear
Relief Valve Setting220 psi1516.9 kPa
Pump Flow Capacity17.5 gal/min66 L/min
Raise Time5 sec4.95 sec
Dump Time1 sec0.95 sec
Lower Time3.2 sec3.2 sec
Bucket
Breakout Force10836 lb48.3 kN
Bucket Capacity - Heaped1.2 yd31 m3
Bucket Capacity - Struck1 yd30.8 m3
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.