- Length W/ Bucket On Ground: 23.53 ft / 7169 mm
- Width Over Tires: 8.53 ft / 2597 mm
- Height To Top Of Cab: 10.95 ft / 3335 mm
- Wheelbase: 9.85 ft / 3000 m
Published dimensions and weight
JCB 436ZX
The JCB 436ZX is an integrated tool carrier of about 16.3 t, built around the QSB 6.7 engine.
01Published dimensions and weight
Dimensions reference
Representative category illustration; exact model may differ.Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight35860 lb16265.9 kg
03Selected published values49
Integrated tool carriers are commonly used for loading and material handling with interchangeable front attachments. Published rows for JCB 436ZX include published bucket capacity of 3 yd3 / 2.3 m3, published breakout force of 39565 lb / 176 kN, published operating weight of 35860 lb / 16265.9 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Length W/ Bucket On Ground” field (23.53 ft / 7169 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.53 ft / 2597 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Height To Top Of Cab” field (10.95 ft / 3335 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Length W/ Bucket On Ground23.53 ft7169 mm
Width Over Tires8.53 ft2597 mm
Height To Top Of Cab10.95 ft3335 mm
Wheelbase9.85 ft3000 m
Ground Clearance1.51 ft459 mm
Hinge Pin Max Height13.12 ft3996 mm
Dump Clearance At Max Lift9.33 ft2843 mm
Max Lift Height12.53 ft3818 mm
Fork Tine Length4.01 ft1220 mm
Reach At Max Height And Dump4.12 ft1254 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelQSB 6.7QSB 6.7
Gross Power178 hp132.8 kw
Net Power165 hp123.1 kw
Power Measured @2200 rpm2200 rpm
Max Torque590 lb ft800 Nm
Torque Measured @1400 rpm1400 rpm
Displacement408.9 cu in6.7 L
AspirationTurbocharged wastegatedTurbocharged wastegated
Operational
Operating Weight35860 lb16265.9 kg
Fuel Capacity61 gal45.5 L
Cooling System Fluid Capacity9 gal34.1 L
Engine Oil Capacity3.7 gal14.1 L
Transmission Fluid Capacity7 gal26.5 L
Front Diff Fluid Capacity10.3 gal39 L
Rear Diff Fluid Capacity9.8 gal37.1 L
Hydraulic System Fluid Capacity55 gal208.2 L
Turning Radius19.4 ft5900 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation21 degrees21 degrees
Static Tipping Load - Bucket25880 lb11739 kg
Static Tipping Load - Forks18274 lb8289 kg
Tire SizeMichelin 20.5R25 XHA (L3)Michelin 20.5R25 XHA (L3)
Transmission
Transmission TypeSmooth shift powershiftSmooth shift powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed Forward23.5 mph37.9 km/h
Max Speed Reverse16.8 mph27.1 km/h
Hydraulic System
Pump TypeTwin variable displacement piston pumpsTwin variable displacement piston pumps
Relief Valve Setting3625 psi24993.5 kPa
Pump Flow Capacity69.8 gal/min264 L/min
Raise Time5.9 sec5.9 sec
Dump Time1 sec1 sec
Lower Time3.4 sec3.4 sec
Bucket
Breakout Force39565 lb176 kN
Bucket Capacity - Heaped3 yd32.3 m3
Bucket Capacity - Struck2.6 yd32 m3
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.