- Longueur hors tout : 35.73 ft / 10889 mm
- Largeur hors tout : 11.01 ft / 3353 mm
- Hauteur hors tout : 12.15 ft / 3703 mm
- Empattement : 17.15 ft / 5227 mm
Dimensions et poids publiés
Caterpillar 735
Le Caterpillar 735 est un tombereau articulé construit autour du moteur C15 with ACERT Technology (394 ch).
01Dimensions et poids publiés
Référence des dimensions
Repère de mesure — non à l'échelle
01Référence des dimensionsLongueur × largeur × hauteur
02Total Empty66689.9 lb30250 kg
03Valeurs publiées sélectionnées123
Les tombereaux articulés servent couramment à transporter des matériaux en vrac sur les chantiers de construction, les carrières et les travaux de terrassement. Les lignes publiées pour Caterpillar 735 comprennent une charge utile publiée de 72091.16 lb / 32700 kg, une capacité de benne publiée de 25.77 yd3 / 19.7 m3, une puissance moteur publiée de 413 hp / 308 kw. Ces valeurs décrivent la configuration publiée; vérifiez la configuration, les accessoires et les documents de la machine précise.
- Comparez le champ publié « Longueur hors tout » (35.73 ft / 10889 mm) à la configuration et aux documents de la machine précise; les options et l'état peuvent différer.
- Comparez le champ publié « Largeur hors tout » (11.01 ft / 3353 mm) à la configuration et aux documents de la machine précise; les options et l'état peuvent différer.
- Comparez le champ publié « Hauteur hors tout » (12.15 ft / 3703 mm) à la configuration et aux documents de la machine précise; les options et l'état peuvent différer.
02Spécifications
Valeurs publiées, regroupées clairement.
Les spécifications et mesures publiées sont organisées par section pour faciliter la consultation.
Dimensions
Longueur hors tout35.73 ft10889 mm
Largeur hors tout11.01 ft3353 mm
Hauteur hors tout12.15 ft3703 mm
Empattement17.15 ft5227 mm
Garde au sol1.76 ft534 mm
Hauteur de déversement22.82 ft6955 mm
Dump Ground Clearance2.09 ft635 mm
Wheel Base Between Back Tires6.4 ft1.96 m
Dump Clearance2 ft0.61 m
Benne
Temps d'abaissement7 sec7 sec
Capacity - Heaped25.77 yd319.7 m3
Capacity - Struck19.23 yd314.7 m3
Charge utile nominale72091.16 lb32700 kg
Temps de levée11 sec11 sec
Moteur
Nombre de cylindres66
Marque du moteur22362236
Modèle du moteurC15 with ACERT TechnologyC15 with ACERT Technology
Puissance brute413 hp308 kw
Puissance nette394 hp293.9 kw
Couple maximal1524.6 lb ft2067 Nm
Couple mesuré à1200 rpm1200 rpm
Type d'aspirationTurbochargedTurbocharged
Cylindrée926 cu in15.2 L
Alésage5.4 in137.2 mm
Course6.8 in171.5 mm
EmissionsThe 735 meets Tier 4 Final/Stage IV emission standards.The 735 meets Tier 4 Final/Stage IV emission standards.
Net Power - Iso 9249424 hp316.2 kw
Net Power - Sae J1349419 hp312.5 kw
Gross Power - Sae J1995435 hp324.4 kw
Flywheel Power385 hp287.1 kw
Net Power - Iso 14396429 hp320 kw
Note (1)The references to Tier 4 Final/Stage IV include U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.The references to Tier 4 Final/Stage IV include U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
Note (2)The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note (3)The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (4)Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Net Power - Eec 80/1269424 hp316.2 kw
Note (5)DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Peak Engine Torque Gross (Sae J1995)1614 lb ft2188.3 Nm
Peak Engine Torque Speed1200 rpm1200 rpm
Engine Model - U.S. Epa Tier 4 Final/Eu Stage IvCat C13 ACERTCat C13 ACERT
Peak Engine Torque Net (Sae J1349)1597 lb ft2165.3 Nm
No Engine De-Rating Below12500 ft3810 m
Exploitation
Capacité de carburant148 gal560 L
Capacité du circuit hydraulique61.6 gal233 L
Capacité du système de refroidissement21.2 gal80 L
Capacité d'huile moteur10.1 gal38 L
Capacité de fluide de transmission19.1 gal72 L
Dimension des pneus26.5R2526.5R25
Transmission
Nombre de rapports avant88
Nombre de rapports arrière11
Vitesse maximale36.3 mph58.3 km/h
Forward - 15.2 mph8.3 km/h
Forward - 27.1 mph11.4 km/h
Forward - 39.6 mph15.4 km/h
Forward - 412.9 mph20.7 km/h
Forward - 517.5 mph28.1 km/h
Forward - 623.5 mph37.8 km/h
Forward - 731.9 mph51.3 km/h
Reverse - 15 mph8 km/h
Reverse - 26.8 mph10.9 km/h
Direction
Lock To Lock4.75 seconds @ 60 rpm4.75 seconds @ 60 rpm
Poids
Center Axle - Empty14087.6 %14087.5393 %
Front Axle - Empty40014 lb18150 kg
Rear Axle - Empty12588.4 lb5710 kg
Front Axle - Loaded48479.7 %48479.6542 %
Center Axle - Loaded45900.3 %45900.2456 %
Rear Axle - Loaded44401.2 lb20140 kg
Total Empty66689.9 lb30250 kg
Total Loaded138781.1 lb62950 kg
Capacités de remplissage d'entretien
Système de refroidissement25.1 gal95.1 L
Réservoir de carburant148 gal560.3 L
Def Tank5.3 gal20.1 L
Engine Crankcase10.6 gal40.2 L
Transmission22.5 gal85.2 L
Système hydraulique86.6 gal327.9 L
Final Drives/Differential21.1 gal79.9 L
Output Transfer Gear Box6.3 gal23.9 L
Équipement de série
Cab - FopsSAE J231 JAN81 and ISO 3449-1992 Level IISAE J231 JAN81 and ISO 3449-1992 Level II
Cab - RopsSAE J1040 May 1994 and ISO 3471-1994SAE J1040 May 1994 and ISO 3471-1994
BrakesSAE J/ISO 3450-1998SAE J/ISO 3450-1998
SteeringISO 5010 1992EISO 5010 1992E
Poids en ordre de marche
Front Axle - Empty41881 lb18997 kg
Center Axle - Empty14406 lb6534.5 kg
Rear Axle - Empty12919 lb5860 kg
Total - Empty69206 lb31391.4 kg
Front Axle - Rated Load7417 lb3364.3 kg
Center Axle - Rated Load32337 lb14667.9 kg
Rear Axle - Rated Load32337 lb14667.9 kg
Total - Rated Load72091 lb32700 kg
Front Axle - Loaded49298 lb22361.2 kg
Center Axle - Loaded46743 lb21202.3 kg
Rear Axle - Loaded45256 lb20527.8 kg
Total - Loaded141297 lb64091.3 kg
Niveaux sonores
Interior Cab79 dB(A)79 dB(A)
Note (1)The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note (2)Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Cercle de braquage
NoteDimensions are for machines equipped with 750/65 R25 tires.Dimensions are for machines equipped with 750/65 R25 tires.
Turning Dimensions - Sae Turning Radius294 in7467.6 mm
Turning Dimensions - Clearance Radius318 in8077.2 mm
Turning Dimensions - Inside Radius149 in3784.6 mm
Turning Dimensions - Aisle Width212 in5384.8 mm
Capacités de la caisse
Heaped (Sae 2:1)25.8 yd319.8 m3
Struck19 yd314.6 m3
Tailgate Struck19.9 yd315.3 m3
Tailgate Heaped Sae 2:127.3 yd320.9 m3
Heaped Sae 1:132 yd324.5 m3
Vérin de levage de la caisse
Temps de levée11 s11 s
Temps d'abaissement7 s7 s
Épaisseur de tôle de la caisse
Avant0.4 in7.9 mm
Scow0.6 in14 mm
Side0.5 in12 mm
Base0.6 in14 mm
Front Plate0.3 in7.2 mm
Base Plate0.6 in13 mm
Side Plates0.5 in11 mm
Body Plate
Body Plate TypeHigh strength Brinell HB450 wear resistant steelHigh strength Brinell HB450 wear resistant steel
Optimal Loader/Truck Pass Matching
NoteAn optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Hydraulic Excavators: 349f/349f Xe - Passes4545
Hydraulic Excavators: 336f/336f Xe - Passes5656
Wheel Loaders: 972m/972m Xe - Passes3434
Wheel Loaders: 966m/966m Xe - Passes44
Wheel Loader: 962m - Passes4545
Wheel Loader: 950m - Passes55
Besoin de la machine, pas seulement des chiffres?
Trouvez-en une, évaluez-la ou publiez votre demande.
Spécifications publiées par le fabricant.