- Longueur hors tout : 32.55 ft / 9920 mm
- Largeur hors tout : 9.44 ft / 2877 mm
- Hauteur hors tout : 11.29 ft / 3440 mm
- Empattement : 15.32 ft / 4669 mm
Dimensions et poids publiés
Caterpillar 730
Le Caterpillar 730 est un tombereau articulé animé par un moteur de 325 ch.
01Dimensions et poids publiés
Référence des dimensions
Repère de mesure — non à l'échelle
01Référence des dimensionsLongueur × largeur × hauteur
02Total Empty50375.7 lb22850 kg
03Valeurs publiées sélectionnées115
Les tombereaux articulés servent couramment à transporter des matériaux en vrac sur les chantiers de construction, les carrières et les travaux de terrassement. Les lignes publiées pour Caterpillar 730 comprennent une charge utile publiée de 61949.9 lb / 28100 kg, une capacité de benne publiée de 22.11 yd3 / 16.9 m3, une puissance moteur publiée de 329 hp / 245.4 kw. Ces valeurs décrivent la configuration publiée; vérifiez la configuration, les accessoires et les documents de la machine précise.
- Comparez le champ publié « Longueur hors tout » (32.55 ft / 9920 mm) à la configuration et aux documents de la machine précise; les options et l'état peuvent différer.
- Comparez le champ publié « Largeur hors tout » (9.44 ft / 2877 mm) à la configuration et aux documents de la machine précise; les options et l'état peuvent différer.
- Comparez le champ publié « Hauteur hors tout » (11.29 ft / 3440 mm) à la configuration et aux documents de la machine précise; les options et l'état peuvent différer.
02Spécifications
Valeurs publiées, regroupées clairement.
Les spécifications et mesures publiées sont organisées par section pour faciliter la consultation.
Dimensions
Longueur hors tout32.55 ft9920 mm
Largeur hors tout9.44 ft2877 mm
Hauteur hors tout11.29 ft3440 mm
Empattement15.32 ft4669 mm
Garde au sol1.63 ft495 mm
Hauteur de déversement21.33 ft6500 mm
Dump Ground Clearance1.83 ft555 mm
Benne
Temps d'abaissement12 sec12 sec
Capacity - Heaped22.11 yd316.9 m3
Capacity - Struck17.14 yd313.1 m3
Charge utile nominale61949.9 lb28100 kg
Temps de levée12 sec12 sec
Moteur
Nombre de cylindres66
Marque du moteur22362236
Modèle du moteurC11 with ACERT TechnologyC11 with ACERT Technology
Puissance brute329 hp245.4 kw
Puissance nette325 hp242.4 kw
Type d'aspirationTurbochaargedTurbochaarged
Cylindrée762.8 cu in12.6 L
Alésage5.1 in129.6 mm
Course6.2 in157.5 mm
EmissionsThe 730 meets Tier 4 Final/Stage IV emission standards.The 730 meets Tier 4 Final/Stage IV emission standards.
Net Power - Iso 9249321 hp239.4 kw
Net Power - Sae J1349367 hp273.7 kw
Gross Power - Sae J1995375 hp279.7 kw
Net Power - Iso 14396370 hp276 kw
Note (1)The references to Tier 4 Final/Stage IV include U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.The references to Tier 4 Final/Stage IV include U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
Note (2)The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note (3)The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (4)Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Net Power - Eec 80/1269321 hp239.4 kw
Note (5)DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Peak Engine Torque Gross (Sae J1995)1579 lb ft2140.9 Nm
Peak Engine Torque Speed1200 rpm1200 rpm
Engine Model - U.S. Epa Tier 4 Final/Eu Stage IvCat C13 ACERTCat C13 ACERT
Peak Engine Torque Net (Sae J1349)1564 lb ft2120.5 Nm
No Engine De-Rating Below12500 ft3810 m
Exploitation
Capacité de carburant95.2 gal360 L
Capacité du circuit hydraulique27 gal102 L
Capacité du système de refroidissement22.5 gal85 L
Capacité d'huile moteur9.8 gal37 L
Capacité de fluide de transmission9.6 gal36 L
Dimension des pneus23.5R2523.5R25
Transmission
Nombre de rapports avant66
Nombre de rapports arrière11
Vitesse maximale34.4 mph55.3 km/h
Forward - 15 mph8.1 km/h
Forward - 29 mph14.5 km/h
Forward - 314 mph22.6 km/h
Forward - 421 mph33.8 km/h
Forward - 529 mph46.7 km/h
Forward - 634 mph54.8 km/h
Reverse - 16 mph9.7 km/h
Direction
Lock To Lock4.75 seconds @ 60 rpm4.75 seconds @ 60 rpm
Poids
Front Axle - Empty28968.8 lb13140 kg
Center Axle - Empty11023.2 %11023.1137 %
Rear Axle - Empty10383.8 lb4710 kg
Front Axle - Loaded34965.4 %34965.3167 %
Center Axle - Loaded39021.9 %39021.8226 %
Rear Axle - Loaded38382.5 lb17410 kg
Total Empty50375.7 lb22850 kg
Total Loaded112369.7 lb50970 kg
Capacités de remplissage d'entretien
Système de refroidissement21.9 gal83 L
Réservoir de carburant108.8 gal411.9 L
Def Tank5.3 gal20.1 L
Engine Crankcase10 gal37.9 L
Transmission12.4 gal47 L
Système hydraulique29.1 gal110.2 L
Final Drives/Differential33 gal125 L
Output Transfer Gear Box6.3 gal23.9 L
Équipement de série
Cab - FopsISO 3449 Level II 2005ISO 3449 Level II 2005
Cab - RopsISO 3471 2008ISO 3471 2008
BrakesISO 3450 2011ISO 3450 2011
SteeringISO 5010 2007ISO 5010 2007
Poids en ordre de marche
Front Axle - Empty33069 lb14999.9 kg
Center Axle - Empty10053 lb4560 kg
Rear Axle - Empty9568 lb4340 kg
Total - Empty52690 lb23899.8 kg
Front Axle - Rated Load7231 lb3280 kg
Center Axle - Rated Load27249 lb12360 kg
Rear Axle - Rated Load27249 lb12360 kg
Total - Rated Load61729 lb27999.9 kg
Front Axle - Loaded40300 lb18279.8 kg
Center Axle - Loaded37302 lb16920 kg
Rear Axle - Loaded36817 lb16700 kg
Total - Loaded114420 lb51900.1 kg
Niveaux sonores
Interior Cab72 dB(A)72 dB(A)
Note (1)The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note (2)Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Cercle de braquage
NoteDimensions are for machines equipped with 23.5R25 tires.Dimensions are for machines equipped with 23.5R25 tires.
Turning Dimensions - Sae Turning Radius294 in7467.6 mm
Turning Dimensions - Clearance Radius318 in8077.2 mm
Turning Dimensions - Inside Radius153 in3886.2 mm
Turning Dimensions - Aisle Width210 in5334 mm
Capacités de la caisse
Heaped (Sae 2:1)23 yd317.6 m3
Struck17.4 yd313.4 m3
Tailgate Struck18.2 yd314 m3
Tailgate Heaped Sae 2:124.6 yd318.9 m3
Vérin de levage de la caisse
Temps de levée12 s12 s
Temps d'abaissement8 s8 s
Épaisseur de tôle de la caisse
Avant0.4 in7.9 mm
Scow0.6 in14 mm
Side0.5 in12 mm
Base0.6 in14 mm
Front Plate0.3 in7.2 mm
Base Plate0.6 in13 mm
Side Plates0.5 in11 mm
Body Plate
Body Plate TypeHigh strength Brinell HB450 wear resistant steelHigh strength Brinell HB450 wear resistant steel
Optimal Loader/Truck Pass Matching
NoteAn optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Hydraulic Excavators: 349f/349f Xe - Passes4545
Hydraulic Excavators: 336f/336f Xe - Passes5656
Wheel Loaders: 972m/972m Xe - Passes3434
Wheel Loaders: 966m/966m Xe - Passes44
Wheel Loader: 962m - Passes4545
Wheel Loader: 950m - Passes55
Besoin de la machine, pas seulement des chiffres?
Trouvez-en une, évaluez-la ou publiez votre demande.
Spécifications publiées par le fabricant.