- Dump Clearance At Max Raise: 8.77 ft / 2671 mm
- Bucket Capacity - Struck: 1.09 yd3 / 0.83 m3
- Bucket Width: 6.89 ft / 2100 mm
- Bucket Capacity - Heaped: 1.31 yd3 / 1 m3
Published dimensions and weight
New Holland W80BTC
The New Holland W80BTC is a wheel loader of about 5.8 t, powered by a 77 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight12727.3 lb5773 kg
03Selected published values42
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for New Holland W80BTC include published bucket capacity of 1.31 yd3 / 1 m3, published operating weight of 12727.3 lb / 5773 kg, published engine power of 82 hp / 61.2 kw. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.77 ft / 2671 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (1.09 yd3 / 0.83 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (6.89 ft / 2100 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.77 ft2671 mm
Bucket Capacity - Struck1.09 yd30.83 m3
Bucket Width6.89 ft2100 mm
Bucket Capacity - Heaped1.31 yd31 m3
Dimensions
Ground Clearance1.09 ft330 mm
Length With Bucket On Ground18.54 ft5650 mm
Width Over Tires6.45 ft1963 mm
Height To Top Of Cab9.16 ft2790 mm
Wheelbase7.71 ft2350 mm
Hinge Pin - Max Height11.35 ft3459 mm
Reach At Max Lift And Dump2.92 ft890 mm
Engine
Number Of Cylinders44
Engine ModelFPT F5CFPT F5C
Net Power77 hp57.5 kw
Gross Power82 hp61.2 kw
Power Measured @2500 rpm2500 rpm
Max Torque226 lb ft306.5 Nm
Displacement189 cu in3.1 L
Torque Measured @1400 rpm1400 rpm
AspirationNaturalNatural
Operational
Operating Weight12727.3 lb5773 kg
Fuel Capacity26.5 gal100 L
Hydraulic System Fluid Capacity19.6 gal74 L
Engine Oil Fluid Capacity2.3 gal8.5 L
Cooling System Fluid Capacity4.4 gal16.5 L
Front Axle/Diff Fluid Capacity2.2 gal8 L
Rear Axle/Diff Fluid Capacity2.2 gal8 L
Static Tipping Weight9740.1 lb4418 kg
Operating Voltage12 V12 V
Alternator Supplied Amperage65 amps65 amps
Tire Size405/70 R20 SPT9405/70 R20 SPT9
Transmission
Transmission TypeHydrostaticHydrostatic
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward12.4 mph20 km/h
Max Speed - Reverse12.4 mph20 km/h
Hydraulic System
Relief Valve Setting3916 psi26999.9 kPa
Pump Flow Capacity21.2 gal/min80 L/min
Raise Time6 sec6 sec
Dump Time1 sec1 sec
Lower Time3 sec3 sec
Pump TypeGearGear
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.