- Dump Clearance At Max Raise: 10.21 ft / 3110 mm
- Bucket Capacity - Heaped: 5.37 yd3 / 4.1 m3
- Bucket Capacity - Struck: 4.58 yd3 / 3.5 m3
- Bucket Width: 9.85 ft / 3000 mm
Published dimensions and weight
New Holland LW270.B
The New Holland LW270.B is a wheel loader of about 23.5 t, built around the Cummins QSM11 668T/M2 A Tier 2 certified engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight51742.5 lb23470 kg
03Selected published values46
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for New Holland LW270.B include published bucket capacity of 5.37 yd3 / 4.1 m3, published breakout force of 51032 lb, published operating weight of 51742.5 lb / 23470 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (10.21 ft / 3110 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (5.37 yd3 / 4.1 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (4.58 yd3 / 3.5 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise10.21 ft3110 mm
Bucket Capacity - Heaped5.37 yd34.1 m3
Bucket Capacity - Struck4.58 yd33.5 m3
Bucket Width9.85 ft3000 mm
Breakout Force51032 lb51032 -
Dimensions
Ground Clearance1.63 ft496 mm
Length With Bucket On Ground28.75 ft8760 mm
Width Over Tires9.72 ft2960 mm
Height To Top Of Cab11.77 ft3587 mm
Wheelbase11.16 ft3400 mm
Hinge Pin - Max Height14.41 ft4390 mm
Reach At Max Lift And Dump3.79 ft1155 mm
Engine
Number Of Cylinders66
Engine Make22912291
Engine ModelCummins QSM11 668T/M2 A Tier 2 certifiedCummins QSM11 668T/M2 A Tier 2 certified
Net Power321 hp239.4 kw
Gross Power306 hp228.2 kw
Power Measured @1800 rpm1800 rpm
Max Torque1090.2 lb ft1478 Nm
Displacement659.1 cu in10.8 L
Torque Measured @1400 rpm1400 rpm
AspirationTurbocharged, air to air cooledTurbocharged, air to air cooled
Torque Rise51 %51 %
Operational
Operating Weight51742.5 lb23470 kg
Fuel Capacity96.2 gal364 L
Hydraulic System Fluid Capacity43.6 gal165 L
Engine Oil Fluid Capacity8 gal30 L
Cooling System Fluid Capacity11.4 gal43 L
Transmission Fluid Capacity8 gal30 L
Front Axle/Diff Fluid Capacity12.2 gal46 L
Rear Axle/Diff Fluid Capacity12.2 gal46 L
Static Tipping Weight42880 lb19450 kg
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation26 degrees26 degrees
Transmission
Transmission Typecountershaft, power shiftcountershaft, power shift
Number Of Forward Gears44
Number Of Reverse Gears44
Max Speed - Forward23 mph36.9 km/h
Max Speed - Reverse24.8 mph39.8 km/h
Hydraulic System
Relief Valve Setting3046 psi21001.5 kPa
Pump Flow Capacity52.6 gal/min199 L/min
Raise Time6.3 sec6.3 sec
Dump Time1.5 sec1.5 sec
Lower Time4.2 sec4.2 sec
Pump Typedual gear pumpdual gear pump
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.