- Dump Clearance At Max Raise: 9.32 ft / 2839 mm
- Bucket Capacity - Heaped: 2.57 yd3 / 1.96 m3
- Bucket Capacity - Struck: 2.18 yd3 / 1.66 m3
- Bucket Width: 8.54 ft / 2602 mm
Published dimensions and weight
New Holland LW130.B
The New Holland LW130.B is a wheel loader; its 668TA/M2, Tier 2 certified engine is rated at 149 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02WeightNot publishedNot published
03Selected published values43
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for New Holland LW130.B include published bucket capacity of 2.57 yd3 / 1.96 m3, published breakout force of 26572.42 lb / 118.2 kN, published engine power of 139 hp / 103.7 kw. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.32 ft / 2839 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.57 yd3 / 1.96 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (2.18 yd3 / 1.66 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.32 ft2839 mm
Bucket Capacity - Heaped2.57 yd31.96 m3
Bucket Capacity - Struck2.18 yd31.66 m3
Bucket Width8.54 ft2602 mm
Breakout Force26572.42 lb118.2 kN
Dimensions
Ground Clearance1.56 ft474 mm
Length With Bucket On Ground22.63 ft6896 mm
Width Over Tires7.95 ft2423 mm
Height To Top Of Cab10.8 ft3290 mm
Wheelbase9.52 ft2900 mm
Hinge Pin - Max Height12.55 ft3823 mm
Reach At Max Lift And Dump2.74 ft835 mm
Engine
Engine Make22492249
Engine Model668TA/M2, Tier 2 certified668TA/M2, Tier 2 certified
Net Power149 hp111.2 kw
Gross Power139 hp103.7 kw
Power Measured @2000 rpm2000 rpm
Max Torque495 lb ft671 Nm
Displacement408.9 cu in6.7 L
AspirationTurbocharged, air to air cooledTurbocharged, air to air cooled
Torque Rise33 %33 %
Operational
Fuel Capacity50 gal189 L
Hydraulic System Fluid Capacity30.1 gal113.6 L
Engine Oil Fluid Capacity4 gal15.1 L
Cooling System Fluid Capacity6.4 gal24 L
Transmission Fluid Capacity5 gal18.9 L
Front Axle/Diff Fluid Capacity5.9 gal22 L
Rear Axle/Diff Fluid Capacity5.9 gal22 L
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size20.5x25 12 ply20.5x25 12 ply
Transmission
Transmission TypeCountershaft, power shiftCountershaft, power shift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward24 mph38.6 km/h
Max Speed - Reverse15.6 mph25 km/h
Hydraulic System
Relief Valve Setting3600.2 psi24822 kPa
Pump Flow Capacity45.2 gal/min171 L/min
Raise Time5.4 sec5.4 sec
Dump Time1.5 sec1.5 sec
Lower Time4.4 sec4.4 sec
Pump Typevariable-displacement, piston pumpvariable-displacement, piston pump
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.