- Dump Clearance At Max Raise: 8.54 ft / 2600 mm
- Bucket Width: 6.73 ft / 2050 mm
- Bucket Capacity - Heaped: 1.18 yd3 / 0.9 m3
- Ground Clearance: 1.09 ft / 330 mm
Published dimensions and weight
New Holland W70TC
The New Holland W70TC is a wheel loader of about 5 t, built around the BF4M2011 engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight11122.4 lb5045 kg
03Selected published values33
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for New Holland W70TC include published bucket capacity of 1.18 yd3 / 0.9 m3, published operating weight of 11122.4 lb / 5045 kg, published engine power of 61 hp / 45.5 kw. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.54 ft / 2600 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (6.73 ft / 2050 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.18 yd3 / 0.9 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.54 ft2600 mm
Bucket Width6.73 ft2050 mm
Bucket Capacity - Heaped1.18 yd30.9 m3
Dimensions
Ground Clearance1.09 ft330 mm
Length With Bucket On Ground18.38 ft5600 mm
Width Over Tires6.27 ft1910 mm
Height To Top Of Cab9.19 ft2800 mm
Wheelbase7.71 ft2350 mm
Hinge Pin - Max Height11.16 ft3400 mm
Reach At Max Lift And Dump2.76 ft840 mm
Engine
Number Of Cylinders44
Engine Make23492349
Engine ModelBF4M2011BF4M2011
Net Power61 hp45.5 kw
Power Measured @2500 rpm2500 rpm
Displacement190 cu in3.2 L
AspirationNaturalNatural
Operational
Operating Weight11122.4 lb5045 kg
Fuel Capacity26.5 gal100 L
Hydraulic System Fluid Capacity17.7 gal67 L
Static Tipping Weight7716.2 lb3500 kg
Turning Radius15.1 ft4600 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage55 amps55 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size365/80 R20365/80 R20
Transmission
Transmission TypeHydrostaticHydrostatic
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward12.5 mph20 km/h
Hydraulic System
Relief Valve Setting3916.1 psi27000 kPa
Pump Flow Capacity17.7 gal/min67 L/min
Pump TypeGearGear
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.