- Dump Clearance At Max Raise: 9.29 ft / 2829 mm
- Bucket Capacity - Heaped: 1 yd3 / 0.77 m3
- Bucket Capacity - Struck: 0.73 yd3 / 0.56 m3
- Bucket Width: 6.25 ft / 1905 mm
Published dimensions and weight
New Holland W50TC
The New Holland W50TC is a wheel loader of about 4.7 t, built around the F4M2011 engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight10258.2 lb4653 kg
03Selected published values45
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for New Holland W50TC include published bucket capacity of 1 yd3 / 0.77 m3, published breakout force of 8386 lb / 37.31 kN, published operating weight of 10258.2 lb / 4653 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.29 ft / 2829 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1 yd3 / 0.77 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (0.73 yd3 / 0.56 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.29 ft2829 mm
Bucket Capacity - Heaped1 yd30.77 m3
Bucket Capacity - Struck0.73 yd30.56 m3
Bucket Width6.25 ft1905 mm
Breakout Force8386 lb37.31 kN
Dimensions
Ground Clearance1.09 ft330 mm
Length With Bucket On Ground17.49 ft5329 mm
Width Over Tires6.1 ft1857 mm
Height To Top Of Cab8.9 ft2711 mm
Wheelbase85.9 in2182 mm
Hinge Pin - Max Height10.22 ft3113 mm
Reach At Max Lift And Dump2.75 ft838 mm
Engine
Number Of Cylinders44
Engine Make23492349
Engine ModelF4M2011F4M2011
Net Power51 hp38.1 kw
Gross Power55 hp41.1 kw
Power Measured @2300 rpm2300 rpm
Max Torque136 lb ft184.4 Nm
Displacement190 cu in3.2 L
Torque Measured @1700 rpm1700 rpm
AspirationNaturalNatural
Operational
Operating Weight10258.2 lb4653 kg
Fuel Capacity26.4 gal100 L
Hydraulic System Fluid Capacity14.8 gal56.1 L
Engine Oil Fluid Capacity2.6 gal9.9 L
Cooling System Fluid Capacity3 gal11.4 L
Front Axle/Diff Fluid Capacity2 gal7.6 L
Rear Axle/Diff Fluid Capacity2.4 gal9.1 L
Static Tipping Weight7377 lb3346.2 kg
Turning Radius12.7 ft3847 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage55 amps55 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size335/80 R18335/80 R18
Transmission
Transmission TypeHydrostaticHydrostatic
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward11.6 mph18.7 km/h
Hydraulic System
Relief Valve Setting3335 psi22994 kPa
Pump Flow Capacity14 gal/min53 L/min
Raise Time6 sec6 sec
Dump Time1 sec1 sec
Lower Time3 sec3 sec
Pump TypeGearGear
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.