- Dump Clearance At Max Raise: 9.07 ft / 2762 mm
- Bucket Capacity - Heaped: 2.66 yd3 / 2.04 m3
- Bucket Capacity - Struck: 2.29 yd3 / 1.76 m3
- Bucket Width: 8.54 ft / 2602 mm
Published dimensions and weight
New Holland W130TC
The New Holland W130TC is a wheel loader of about 12.6 t, powered by a 136 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight27711 lb12569.5 kg
03Selected published values48
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for New Holland W130TC include published bucket capacity of 2.66 yd3 / 2.04 m3, published breakout force of 23909 lb / 106.36 kN, published operating weight of 27711 lb / 12569.5 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.07 ft / 2762 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.66 yd3 / 2.04 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (2.29 yd3 / 1.76 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.07 ft2762 mm
Bucket Capacity - Heaped2.66 yd32.04 m3
Bucket Capacity - Struck2.29 yd31.76 m3
Bucket Width8.54 ft2602 mm
Breakout Force23909 lb106.36 kN
Dimensions
Ground Clearance1.56 ft474 mm
Length With Bucket On Ground23.93 ft7293 mm
Width Over Tires7.82 ft2382 mm
Height To Top Of Cab11.17 ft3404 mm
Wheelbase9.52 ft2900 mm
Hinge Pin - Max Height13 ft3961 mm
Reach At Max Lift And Dump4.07 ft1239 mm
Engine
Number Of Cylinders66
Engine Make22492249
Engine Model668TA/M2668TA/M2
Net Power136 hp101.5 kw
Gross Power148 hp110.4 kw
Power Measured @1800 rpm1800 rpm
Max Torque509 lb ft690.2 Nm
Displacement411 cu in6.8 L
Torque Measured @1200 rpm1200 rpm
AspirationDirect Injection, dieselDirect Injection, diesel
Torque Rise33 %33 %
Operational
Operating Weight27711 lb12569.5 kg
Fuel Capacity50 gal189.3 L
Hydraulic System Fluid Capacity30 gal113.6 L
Engine Oil Fluid Capacity4 gal15.1 L
Cooling System Fluid Capacity6.3 gal23.9 L
Transmission Fluid Capacity5 gal19 L
Front Axle/Diff Fluid Capacity5.9 gal22 L
Rear Axle/Diff Fluid Capacity5.9 gal22 L
Static Tipping Weight20290 lb9203.4 kg
Turning Radius17 ft5175 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size20.5R25(L3)20.5R25(L3)
Transmission
Transmission TypeCountershaft, Power shiftCountershaft, Power shift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward24 mph38.7 km/h
Max Speed - Reverse15.6 mph25.2 km/h
Hydraulic System
Relief Valve Setting3625 psi24993.5 kPa
Pump Flow Capacity45.2 gal/min171.2 L/min
Raise Time5.4 sec5.4 sec
Dump Time1.5 sec1.5 sec
Lower Time5 sec5 sec
Pump TypeVariable-Displacement, Piston PumpVariable-Displacement, Piston Pump
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.