- Dump Clearance At Max Raise: 10.9 ft / 3320 mm
- Bucket Capacity - Heaped: 7.2 yd3 / 5.5 m3
- Bucket Capacity - Struck: 6.15 yd3 / 4.7 m3
- Bucket Width: 11.36 ft / 3460 mm
Published dimensions and weight
John Deere 844K Z-Bar
The John Deere 844K Z-Bar pairs the 6135H, Tier III certified engine (380 hp) with an operating weight near 32 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight70629.5 lb32037 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 844K Z-Bar include published bucket capacity of 7.2 yd3 / 5.5 m3, published breakout force of 47860 lb / 212.9 kN, published operating weight of 70629.5 lb / 32037 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (10.9 ft / 3320 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (7.2 yd3 / 5.5 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (6.15 yd3 / 4.7 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise10.9 ft3320 mm
Bucket Capacity - Heaped7.2 yd35.5 m3
Bucket Capacity - Struck6.15 yd34.7 m3
Bucket Width11.36 ft3460 mm
Breakout Force47860 lb212.9 kN
Dimensions
Ground Clearance1.51 ft460 mm
Length With Bucket On Ground31.67 ft9650 mm
Width Over Tires10.48 ft3194 mm
Height To Top Of Cab12.34 ft3760 mm
Wheelbase12.14 ft3700 mm
Hinge Pin - Max Height15.16 ft4620 mm
Reach At Max Lift And Dump4.89 ft1490 mm
Engine
Number Of Cylinders66
Engine Make22402240
Engine Model6135H, Tier III certified6135H, Tier III certified
Net Power380 hp283.4 kw
Power Measured @1600 rpm1600 rpm
Max Torque1323 lb ft1793.8 Nm
Displacement824 cu in13.6 L
Torque Measured @900 rpm900 rpm
AspirationTurbocharged charge air cooledTurbocharged charge air cooled
Torque Rise44 %44 %
Operational
Operating Weight70629.5 lb32037 kg
Fuel Capacity146.1 gal553 L
Hydraulic System Fluid Capacity64.5 gal244 L
Engine Oil Fluid Capacity10.1 gal38 L
Cooling System Fluid Capacity13.8 gal52 L
Transmission Fluid Capacity12 gal45.4 L
Front Axle/Diff Fluid Capacity14.6 gal55 L
Rear Axle/Diff Fluid Capacity15.6 gal59 L
Static Tipping Weight51489 lb23355 kg
Turning Radius20.7 ft6300 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Rear Axle Oscillation26 degrees26 degrees
Tire Size29.5 R 2529.5 R 25
Transmission
Transmission TypeCountershaft, powershiftCountershaft, powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward25.2 mph40.5 km/h
Max Speed - Reverse17 mph27.3 km/h
Hydraulic System
Relief Valve Setting3500 psi24131.7 kPa
Pump Flow Capacity164.1 gal/min621 L/min
Raise Time5.9 sec5.9 sec
Dump Time1.9 sec1.9 sec
Lower Time3.5 sec3.5 sec
Pump Typetwo variable displacement, load sensing axial pistontwo variable displacement, load sensing axial piston
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.