- Dump Clearance At Max Raise: 8.39 ft / 2555 mm
- Bucket Capacity - Heaped: 1 yd3 / 0.8 m3
- Bucket Capacity - Struck: 0.9 yd3 / 0.7 m3
- Bucket Width: 6.53 ft / 1990 mm
Published dimensions and weight
John Deere 244H
The John Deere 244H is a 5.2 t-class wheel loader with a 55 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight11370 lb5157 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 244H include published bucket capacity of 1 yd3 / 0.8 m3, published breakout force of 10143 lb / 45.1 kN, published operating weight of 11370 lb / 5157 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.39 ft / 2555 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1 yd3 / 0.8 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (0.9 yd3 / 0.7 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.39 ft2555 mm
Bucket Capacity - Heaped1 yd30.8 m3
Bucket Capacity - Struck0.9 yd30.7 m3
Bucket Width6.53 ft1990 mm
Breakout Force10143 lb45.1 kN
Dimensions
Ground Clearance1.09 ft330 mm
Length With Bucket On Ground16.25 ft4950 mm
Width Over Tires6.34 ft1930 mm
Height To Top Of Cab9.83 ft2995 mm
Wheelbase7.22 ft2200 mm
Hinge Pin - Max Height10.37 ft3160 mm
Reach At Max Lift And Dump2.78 ft845 mm
Engine
Number Of Cylinders44
Engine Make23482348
Engine Model4TNE984TNE98
Net Power55 hp41 kw
Gross Power58 hp43 kw
Power Measured @2200 rpm2200 rpm
Max Torque166 lb ft225 Nm
Displacement202 cu in3.4 L
Torque Measured @1300 rpm1300 rpm
AspirationNaturalNatural
Operational
Operating Weight11370 lb5157 kg
Fuel Capacity18.5 gal70 L
Hydraulic System Fluid Capacity19.3 gal73 L
Engine Oil Fluid Capacity3.1 gal11.5 L
Cooling System Fluid Capacity2.9 gal10.9 L
Transmission Fluid Capacity2.7 gal10 L
Front Axle/Diff Fluid Capacity2.6 gal9.5 L
Rear Axle/Diff Fluid Capacity2.6 gal9.5 L
Static Tipping Weight7474 lb3390.2 kg
Turning Radius12.5 ft3790 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage35 amps35 amps
Rear Axle Oscillation22 degrees22 degrees
Tire Size17.5/65-2017.5/65-20
Transmission
Transmission TypeHydrostaticHydrostatic
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward20.1 mph32.2 km/h
Max Speed - Reverse20.1 mph32.2 km/h
Hydraulic System
Relief Valve Setting2990 psi20615 kPa
Pump Flow Capacity21.2 gal/min80 L/min
Raise Time4.3 sec4.3 sec
Dump Time0.8 sec0.8 sec
Lower Time3.8 sec3.8 sec
Pump TypeGearGear
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.