- Dump Clearance At Max Raise: 7.95 ft / 2421 mm
- Bucket Capacity - Heaped: 1 yd3 / 0.8 m3
- Bucket Capacity - Struck: 0.8 yd3 / 0.6 m3
- Bucket Width: 6.63 ft / 2019 mm
Published dimensions and weight
John Deere 304H Waste Handler
The John Deere 304H Waste Handler is a wheel loader of about 6.3 t, built around the 4TNE98 engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight13880 lb6296 kg
03Selected published values46
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 304H Waste Handler include published bucket capacity of 1 yd3 / 0.8 m3, published breakout force of 10410 lb / 4722 kN, published operating weight of 13880 lb / 6296 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (7.95 ft / 2421 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1 yd3 / 0.8 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (0.8 yd3 / 0.6 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise7.95 ft2421 mm
Bucket Capacity - Heaped1 yd30.8 m3
Bucket Capacity - Struck0.8 yd30.6 m3
Bucket Width6.63 ft2019 mm
Breakout Force10410 lb4722 kN
Dimensions
Ground Clearance0.99 ft300 mm
Length With Bucket On Ground17.84 ft5436 mm
Width Over Tires6.5 ft1980 mm
Height To Top Of Cab8.92 ft2718 mm
Wheelbase7.06 ft2150 mm
Hinge Pin - Max Height10.34 ft3150 mm
Reach At Max Lift And Dump3.04 ft925 mm
Engine
Number Of Cylinders44
Engine Make23482348
Engine Model4TNE984TNE98
Net Power65 hp48 kw
Gross Power69 hp51 kw
Power Measured @2400 rpm2400 rpm
Max Torque173 lb ft235 Nm
Displacement202 cu in3.3 L
Torque Measured @1400 rpm1400 rpm
AspirationNaturalNatural
Operational
Operating Weight13880 lb6296 kg
Fuel Capacity18.5 gal70 L
Hydraulic System Fluid Capacity11.9 gal45 L
Engine Oil Fluid Capacity2.5 gal9.4 L
Cooling System Fluid Capacity3.3 gal12.2 L
Front Axle/Diff Fluid Capacity1.6 gal5.7 L
Rear Axle/Diff Fluid Capacity1.3 gal4.7 L
Static Tipping Weight8986 lb4076 kg
Turning Radius10.7 ft3260 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage60 amps60 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size40x 14-1640x 14-16
Transmission
Transmission TypeHydrostaticHydrostatic
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward18.6 mph30 km/h
Max Speed - Reverse18.6 mph30 km/h
Hydraulic System
Relief Valve Setting3046 psi21000 kPa
Pump Flow Capacity22 gal/min82.5 L/min
Raise Time4.5 sec4.5 sec
Dump Time1.5 sec1.5 sec
Lower Time3.8 sec3.8 sec
Pump TypeGearGear
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.