- Dump Clearance At Max Raise: 8.9 ft / 2711 mm
- Bucket Capacity - Heaped: 1.63 yd3 / 1.25 m3
- Bucket Capacity - Struck: 1.3 yd3 / 1 m3
- Bucket Width: 7.71 ft / 2350 mm
Published dimensions and weight
John Deere 344E
The John Deere 344E pairs the 4045D engine (75 hp) with an operating weight near 7.3 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight16014 lb7263.9 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 344E include published bucket capacity of 1.63 yd3 / 1.25 m3, published breakout force of 14595 lb / 64.93 kN, published operating weight of 16014 lb / 7263.9 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.9 ft / 2711 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.63 yd3 / 1.25 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (1.3 yd3 / 1 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.9 ft2711 mm
Bucket Capacity - Heaped1.63 yd31.25 m3
Bucket Capacity - Struck1.3 yd31 m3
Bucket Width7.71 ft2350 mm
Breakout Force14595 lb64.93 kN
Dimensions
Ground Clearance1.28 ft390 mm
Length With Bucket On Ground19.72 ft6010 mm
Width Over Tires7.14 ft2174 mm
Height To Top Of Cab10.18 ft3100 mm
Wheelbase11.65 ft3550 mm
Hinge Pin - Max Height11.26 ft3430 mm
Reach At Max Lift And Dump2.69 ft819 mm
Engine
Number Of Cylinders44
Engine Make22402240
Engine Model4045D4045D
Net Power75 hp56 kw
Gross Power80 hp59.7 kw
Power Measured @2200 rpm2200 rpm
Max Torque215 lb ft291.6 Nm
Displacement276 cu in4.6 L
Torque Measured @1200 rpm1200 rpm
AspirationNaturalNatural
Operational
Operating Weight16014 lb7263.9 kg
Fuel Capacity32 gal121.2 L
Hydraulic System Fluid Capacity10.6 gal40 L
Engine Oil Fluid Capacity3.5 gal13 L
Cooling System Fluid Capacity9 gal34 L
Transmission Fluid Capacity2.1 gal7.8 L
Front Axle/Diff Fluid Capacity4.3 gal16 L
Rear Axle/Diff Fluid Capacity4.3 gal16 L
Static Tipping Weight11356 lb5151 kg
Turning Radius14.5 ft4395.3 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage105 amps105 amps
Rear Axle Oscillation26 degrees26 degrees
Tire Size15.5-2515.5-25
Transmission
Transmission TypeHydrostaticHydrostatic
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward18.6 mph30 km/h
Max Speed - Reverse18.6 mph30 km/h
Hydraulic System
Relief Valve Setting2500 psi17238 kPa
Pump Flow Capacity32.3 gal/min122.3 L/min
Raise Time5.3 sec5.3 sec
Dump Time1 sec1 sec
Lower Time3 sec3 sec
Pump TypeGear PumpGear Pump
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.