- Dump Clearance At Max Raise: 9.01 ft / 2746 mm
- Bucket Capacity - Heaped: 1.7 yd3 / 1.3 m3
- Bucket Capacity - Struck: 1.4 yd3 / 1.08 m3
- Bucket Width: 7.88 ft / 2400 mm
Published dimensions and weight
John Deere 324H
The John Deere 324H is a wheel loader of about 7 t; its 4045DF engine is rated at 80 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight15520 lb7039.8 kg
03Selected published values46
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 324H include published bucket capacity of 1.7 yd3 / 1.3 m3, published breakout force of 17754 lb / 78.98 kN, published operating weight of 15520 lb / 7039.8 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.01 ft / 2746 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.7 yd3 / 1.3 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (1.4 yd3 / 1.08 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.01 ft2746 mm
Bucket Capacity - Heaped1.7 yd31.3 m3
Bucket Capacity - Struck1.4 yd31.08 m3
Bucket Width7.88 ft2400 mm
Breakout Force17754 lb78.98 kN
Dimensions
Ground Clearance1.17 ft355 mm
Length With Bucket On Ground19.82 ft6040 mm
Width Over Tires6.93 ft2110 mm
Height To Top Of Cab9.93 ft3025 mm
Wheelbase8.21 ft2500 mm
Hinge Pin - Max Height10.97 ft3343 mm
Reach At Max Lift And Dump2.71 ft825 mm
Engine
Number Of Cylinders44
Engine Make22402240
Engine Model4045DF4045DF
Net Power80 hp59 kw
Gross Power84 hp62 kw
Power Measured @2400 rpm2400 rpm
Max Torque223 lb ft302 Nm
Displacement276 cu in4.5 L
Torque Measured @1200 rpm1200 rpm
AspirationNaturalNatural
Operational
Operating Weight15520 lb7039.8 kg
Fuel Capacity37 gal140 L
Hydraulic System Fluid Capacity17.2 gal65 L
Engine Oil Fluid Capacity3.2 gal12 L
Cooling System Fluid Capacity4 gal15 L
Front Axle/Diff Fluid Capacity2.6 gal9.5 L
Rear Axle/Diff Fluid Capacity2.6 gal9.5 L
Static Tipping Weight10595.5 lb4806 kg
Turning Radius12.5 ft3790 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage65 amps65 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size15.5-2515.5-25
Transmission
Transmission TypeHydrostaticHydrostatic
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward17.4 mph28.1 km/h
Max Speed - Reverse17.4 mph28 km/h
Hydraulic System
Relief Valve Setting3045 psi21000 kPa
Pump Flow Capacity30 gal/min115 L/min
Raise Time4.3 sec4.3 sec
Dump Time1.4 sec1.4 sec
Lower Time3.3 sec3.3 sec
Pump TypeGearGear
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.